Page 36 / 109
Scroll up to view Page 31 - 35
Chapter 4
Configuration
WCR-GN User Manual
35
Parameter
Meaning
Domain Name
* Only when selecting TZO
Enter the domain name which is registered to the Dynamic DNS
service.
You may enter up to 255 alphanumerical characters,
hyphens, and periods.
IP Address Update Period
Specifies the period to notify the dynamic DNS service provider of
the current IP address. When DynDNS is selected, set it between 0
and 35 days. When TZO is selected, set it between 0 and 99 days.
If
0 (zero) day is set, no periodic update is performed.
Internet Side IP Address
The WAN-side IP address of the AirStation’s Internet port. This
address is sent to the dynamic DNS service provider.
Domain Name
The domain name assigned by the dynamic DNS Service provider.
The AirStation can be accessed from the Internet using this domain
name.
Status
Display the status of dynamic DNS service.
Page 37 / 109
WCR-GN User Manual
36
Chapter 4
Configuration
LAN
Configure the LAN side port and DHCP server settings.
Parameter
Meaning
LAN Side IP Address
Set a LAN side IP address and subnet mask.
DHCP Server Function
* Router Mode only
Enable or disable the DHCP server, which assigns IP addresses
automatically.
DHCP IP Address Pool
* Router Mode only
Configure the range of IP addresses to be assigned by the DHCP
server and IP addresses to be excluded from that range. Values from
0-253 may be entered.
Advanced Settings
* Router Mode only
Select Display to display the advanced settings options for the
DHCP server.
Lease Period
* Router Mode only
Set the effective period of an IP address assigned by the DHCP
server. Up to 999 hours may be entered.
Default Gateway
* Router Mode only
Set the default gateway IP address for the DHCP server to issue to
clients.
Page 38 / 109
Chapter 4
Configuration
WCR-GN User Manual
37
Parameter
Meaning
DNS Servers
* Router Mode only
Set the dDNS server IP address for the DHCP server to issue to
clients.
WINS Server
* Router Mode only
Set the WINS server IP address for the DHCP server to issue to
clients.
Domain Name
* Router Mode only
Set the domain name for the DHCP server to issue to clients. You
may enter up to 127 alphanumerical characters, hyphens, and
periods.
Default Gateway
* Bridge Mode only
Set the default gateway IP address.
DNS Server Address
* Bridge Mode only
Set the DNS server IP address.
Page 39 / 109
WCR-GN User Manual
38
Chapter 4
Configuration
DHCP Lease (Router Mode only)
The screen to configure DHCP lease.
Parameter
Meaning
IP Address
Enter an IP address to lease manually. The IP address should be
from the same subnet as the DHCP scope, but not be within the
range that DHCP is assigning to other devices.
MAC Address
Enter the MAC address which identifies the client.
Current DHCP Client Information
Displays information for current leases. An IP address which is
leased automatically can be changed to be leased manually by
clicking“
Manual Assignment
”.
Page 40 / 109
Chapter 4
Configuration
WCR-GN User Manual
39
NAT (Router Mode only)
The screen to configure settings relating to the network address translation function which is used
to connect the LAN side to the Internet.
Parameter
Meaning
Address Translation
Enable to use Network Address Translation.
Log Output of Deleted Packets
Enable to log deleted packets (such as errors) during address
translation.
19216811.live