Page 56 / 109
Scroll up to view Page 51 - 55
Chapter 4
Configuration
WCR-GN User Manual
55
Parameter
Meaning
Reject IDENT Requests
Enabling this option will answer IDENT requests from the Internet
side with corresponding rejection packets. Enable this option if
you experienced slower transfer speed for network application
such as sending mail, using ftp or displaying on browser. If
you have configured transfer of IDENT requests to the LAN
side computer in the address translation settings (DMZ or TCP
port:113), that setting has higher priority, and overrides this
setting.
Block Ping from Internet
If this is enabled, the AirStation will not respond to pings from the
Internet side. You can configure this with PPPoE if you select“
Use
PPPoE Client
”in Method of Acquiring IP address (page 25), or if
Easy Setup identified a PPPoE connection during setup.
Page 57 / 109
WCR-GN User Manual
56
Chapter 4
Configuration
IP Filter (Router Mode only)
The screen to edit IP filters which relates to the packets passing through the LAN side and the Inter
-
net side.
Parameter
Meaning
Log Output
If enabled, IP filter activity is saved to a log.
Operation
Specify how to process target packets.
Direction
Specify the transmission direction of target packets.
IP Address
Specify the sender's IP address and receiver's IP address of the
target packets.
Protocol
Select a protocol for target transmission packet.
IP Filter Information
Display the list of IP filters which have been registered.
Page 58 / 109
Chapter 4
Configuration
WCR-GN User Manual
57
VPN Pass Through (Router Mode only)
The screen to configure IPv6 pass through, PPPoE pass through, and PPTP pass through.
Parameter
Meaning
IPv6 Pass Through
Enable to use IPv6 Pass Through for address translation.
PPPoE Pass Through
Enable to use PPPoE bridge. Using PPPoE bridge lets you
automatically obtain an IP address from your provider using the
PPPoE protocol from your computer connected to the LAN side
because all PPPoE packets can pass through between the Internet
and LAN.
PPTP Pass Through
Enable to use the PPTP Pass Through for address translation.
Page 59 / 109
WCR-GN User Manual
58
Chapter 4
Configuration
LAN Config (Router Mode only)
Port Forwarding (Router Mode only)
The screen to configure the port translation.
Parameter
Meaning
Group
Specify a group name for a new rule to belong to. Select "
New
Group
" and enter the new group name in the Group Name
field to create a new group. A group name can include up to 16
alphanumeric letters.
Internet Side IP Address
Enter the Internet side IP address (before translation) for the port
translation table entry.
Protocol
Select the Internet side protocol (before translation) for the port
translation table entry.
Page 60 / 109
Chapter 4
Configuration
WCR-GN User Manual
59
Parameter
Meaning
LAN Side IP Address
Enter the LAN side IP address (after translation) for the port
translation table entry.
LAN Side Port
Select the LAN side (after translation) port number (1 - 65535) for
the port translation table entry.
Port Forwarding Registration
Information
Shows current entries in the port translation table.
DMZ (Router Mode only)
The screen to configure a destination to transfer communication packets without a LAN side
destination.
Parameter
Meaning
IP Address of DMZ
Enter the IP address of the destination to which packets which are
not routed by a port translation table are forwarded.
Note: RIP protocol packets (UDP port number 520) will not be
forwarded.
19216811.live