Page 66 / 109
Scroll up to view Page 61 - 65
Chapter 4
Configuration
WCR-GN User Manual
65
NTP
The screen to configure an NTP server to automatically synchronise the AirStation’s internal clock.
Parameter
Meaning
NTP Functionality
Enable to use an NTP server to automatically set the AirStation's
internal clock.
NTP Server
Enter the name of the NTP server as a host name, host name with
domain name, or IP address. Up to 255 alphanumeric characters,
hyphens (-), and underscores (_) may be used.
Update Interval
How often should the AirStation submit a time request to the NTP
server? Intervals of 1 - 24 hours may be set.
Page 67 / 109
WCR-GN User Manual
66
Chapter 4
Configuration
Access
The screen to restrict access to the AirStation’s settings screens.
Parameter
Meaning
Log Output
Enabling outputs a log of changes to access settings.
Prohibit configuration from wireless
LAN
If enabled, prevents access to settings screens from wirelessly
connected devices (only wired devices may configure).
Prohibit configuration from wired
LAN
If enabled, prevents access to settings screens from wired devices
(only wirelessly connected devices may configure).
Permit configuration from wired
Internet
*Router mode only
If enabled, allows access to settings screens from network devices
on the Internet side.
Permitted IP address
*Router mode only
Displayed only if Internet side configuration is enabled. Enter the IP
address of the device that is permitted to configure the AirStation
remotely from the Internet side.
Permitted Port
*Router mode only
Displayed only if Internet side configuration is enabled. Set a port
number (1 - 65535) if configuring the AirStation from the Internet
side.
Page 68 / 109
Chapter 4
Configuration
WCR-GN User Manual
67
Log
The screen to transfer the log information of the AirStation by the syslog.
Parameter
Meaning
Log Transfer
Enable to send logs to a syslog server.
Syslog Server
Indentify the syslog server by host name, host name with domain
name, or IP address. You may enter up to 255 alphanumeric
characters, hyphens (-), and underscores (_).
Transfer Logs
Choose which logs will be transferred to the syslog server.
Page 69 / 109
WCR-GN User Manual
68
Chapter 4
Configuration
Save/Restore
The screen to save to or restore from an AirStation configuration file.
Parameter
Meaning
Save current settings
Clicking "
Save
" will save the current configuration of the AirStation
to a file. If the“
Encrypt the configuration file with a password
”option
is checked, then the configuration file will be password protected
with the specified password.
Restore Configuration from Backup
File
Restore the configuration of the AirStation from a saved
configuration file by clicking the "
Browse
" button, navigating to the
configuration file, and then clicking Restore. If the configuration file
was password protected, then put a check next to "
To restore from
the file you need the password
", enter the password, and click“
Open
”.
Page 70 / 109
Chapter 4
Configuration
WCR-GN User Manual
69
Initialize/Restart
The screen to initialize and restore the AirStation.
Parameter
Meaning
Restart
Click "
Restart Now
" to restart the AirStation.
Initialize
Click "
Initialize Now
" to initialize and restart the AirStation.
19216811.live