Page 81 / 109
Scroll up to view Page 76 - 80
WCR-GN User Manual
80
Chapter 5
Connect to a Wireless Network
Manual Setup
You can also connect to the AirStation without installing Client Manager V or Client Manager 3 by
using Windows standard utility.
The procedure varies depending on which version of Windows you are using.
Windows 7 (WLAN AutoConfig)
Use Windows standard utility (WLAN AutoConfig) to connect to the AirStation.
1
Click on the network icon
in the system tray
.
2
Select the target AirStation’s name and click
“Connect“. For future use, checking “Connect
automatically“ is recommended.
Page 82 / 109
Chapter 5
Connect to a Wireless Network
WCR-GN User Manual
81
3
If this screen is displayed, enter the
encryption key (such as WEP key or pre-
shared key) and click “
OK”
.
1
Right click on the wireless network icon
in the system tray
.
2
Click“
Connect to a network
”
.
When the screen at left is displayed, select the
network to connect to and click “
Connect
”
.
3
Windows Vista (WLAN AutoConfig)
Use Windows standard utility (WLAN AutoConfig) to connect to the following AirStation.
Page 83 / 109
WCR-GN User Manual
82
Chapter 5
Connect to a Wireless Network
If the screen below is displayed, click“
I want to enter the network key or passphrase instead
”.
(If this screen is not displayed, go to step 4)
Page 84 / 109
Chapter 5
Connect to a Wireless Network
WCR-GN User Manual
83
When the screen at left is displayed, enter an
encryption key (such as WEP key or pre-shared
key) and click“
Connect”
.
4
Follow the instructions displayed on the screen to finish configuration.
(If the Set Network Location screen is displayed, select“
Home
”,“
Work”
, or“
Public location
“
depending where you’re using the AirStation.
Page 85 / 109
WCR-GN User Manual
84
Chapter 5
Connect to a Wireless Network
Windows XP (Wireless Zero Configuration)
Windows XP includes a built-in utility to connect to your AirStation.
Note:
If Client Manager 3 is installed on your computer, Wireless Zero Configuration is disabled. Uninstall Client
Manager 3 to use Wireless Zero Configuration, or just use Client Manager 3 to connect to the AirStation.
1
Right click on the wireless network icon
displayed in the system tray.
2
Click“
View Available Wireless Networks”
.
When the screen at left is displayed, select the
network to connect to and click“
Connect
”.
3
When the screen at left is displayed, enter the
encryption key (such as WEP key or pre-shared
key) and click“
Connect”
.
4
Follow the instructions displayed on the screen to finish configuration.
19216811.live