Page 96 / 109
Scroll up to view Page 91 - 95
Appendix B
Default Configuration Settings
WCR-GN User Manual
95
Feature
Parameter
Default Setting
Time/Date
Local Date
2009 Year 1 Month 1 Day
Local Time
0 Hour 0 Minute 0 Seconds
Time Zone
(GMT−00:00) Greenwich Mean Time, London
NTP
NTP Functionality
Disable
NTP Server
none
Update Interval
24 hours
Access
Log Output
Disable
Limitation Item
Prohibit configuration from wireless LAN
Disable
Prohibit configuration from wired LAN
Disable
Permit configuration from wired Internet
Disable
Log
Log Transfer
Disable
Syslog Server
none
Transfer Logs
Router Mode:
Address Translation, IP Filter, Firewall, PPPoE Cli
-
ent, Dynamic DNS, DHCP Client, DHCP Server,
AOSS, Wireless Client, Authentication, Setting
Changes, System Boot, NTP Client, and Wired
Link
Bridge Mode:
IP Filter, DHCP Client, AOSS, Wireless Client, Au
-
thentication, Setting Changes, System Boot, NTP
Client, and Wired Link
Page 97 / 109
WCR-GN User Manual
96
Appendix C
TCP/IP Settings in Windows
Windows 7
To perform the settings for Windows 7, follow the procedure below.
1
Click
Start
>
Control Panel
>
Network and Internet
.
2
Double click“
Network and Sharing Center”
.
3
Click“
Change Adapter Settings”
on the left side menu.
4
Right click on“
Local Area Connection”
, then click“
Properties”
.
5
If the message“
Windows needs your permission to continue” appears
, click“
Continue”
.
6
Select“
Internet Protocol Version 4 (TCP/IPv4)”
then click“
Properties”
.
7
Select“
Obtain an IP address automatically”
and“
Obtain DNS server address automatically”
, then
click“
OK”
in normal situations.
If you fix the IP address, enter the value as necessary.
ex) If the router's IP address is 192.168.11.1,
IP address
192.168.11.80
Subnet mask
255.255.255.0
Default gateway
blank
Preferred DNS server
blank
Alternate DNS server
blank
8
Click“
OK”
.
Page 98 / 109
Appendix C
TCP/IP Settings in Windows
WCR-GN User Manual
97
1
Click
Start
>
Control Panel
.
2
Double click“
Network and Sharing Center”
.
3
Click“
Manage network connections”
on the left side menu.
4
Right click on“
Local Area Connection”
, then click“
Properties”
.
5
When the message“
Windows needs your permission to continue” appears
, click“
Continue”
.
6
Select“
Internet Protocol Version 4 (TCP/IPv4)”
then click“
Properties”
.
7
Select“
Obtain an IP address automatically”
and“
Obtain DNS server address automatically”
, then
click“
OK”
in normal situations.
If you fix the IP address, enter the value as necessary.
ex) If the router's IP address is 192.168.11.1,
IP address
192.168.11.80
Subnet mask
255.255.255.0
Default gateway
blank
Preferred DNS server
blank
Alternate DNS server
blank
8
Click“
Close”
.
Windows Vista
To perform the settings for Windows Vista, follow the procedure below.
Page 99 / 109
WCR-GN User Manual
98
Appendix C
TCP/IP Settings in Windows
1
Click
Start
>
Settings
>
Control Panel
.
2
Double click“
Network”
.
3
Right click on“
Local Area Connection”
, then click“
Properties”
.
4
Select“
Internet Protocol (TCP/IP)”
, then click“
Properties”
.
5
Select“
Obtain an IP address automatically”
and“
Obtain DNS server address
automatically”
, and then click“
OK”
in normal situations.
If you fix the IP address, enter the value as necessary.
ex) If the router's IP address is 192.168.11.1;
IP address
192.168.11.80
Subnet mask
255.255.255.0
Default gateway
blank
Preferred DNS server
blank
Alternate DNS server
blank
6
Click“
Close”
.
Windows XP
To perform the settings for Windows XP, follow the procedure below.
Page 100 / 109
RESET
WCR-GN User Manual
99
Appendix D
Restoring the Default Configuration
Hold down this button for 3 seconds. The
AirStation will be initialized.
19216811.live