Page 31 / 109
Scroll up to view Page 26 - 30
WCR-GN User Manual
30
Chapter 4
Configuration
Parameter
Meaning
Admin Config
Click this tab to display the configuration screen which is related to
the administration of the AirStation.
Diagnostic
Click this tab to display the status of the AirStation.
Easy Setup
Enable you to configure the AirStation easily such as an encryption
method of the wireless signal or changing a wireless channel.
Mode Information
Switches router mode and bridge mode.
Internet Information
*Router mode only
Displays the current information where the AirStation is connected
on the Internet side.
Check Connection
*Router mode only
Clicking this button to check if the AirStation is connected to the
Internet properly.
Refresh
*Router mode only
Clicking this button to refresh the screen which is currently
displayed.
WIRELESS
Displays the current wireless settings.
AOSS
Click this button to display the AOSS configuration screen.
WPS
Click this button to display the WPS configuration screen.
Language
Enable you to select the language you use.
If
Auto
is selected, the same language displayed on the browser will
be selected automatically.
Logout
Log out from the configuration screen of the AirStation. If the
web configuration screen is not used for 5 minutes, it will log out
automatically.
Page 32 / 109
Chapter 4
Configuration
WCR-GN User Manual
31
Internet/LAN (LAN Config)
Internet (Router Mode only)
The screen to configure a port of the Internet side.
Parameter
Meaning
Method of Acquiring IP Address
Specify how the Internet side IP address is obtained.
Default Gateway
Configure an IP address for the default gateway.
Address of DNS Name Server
Specify an IP address of the DNS server.
Internet MAC Address
Configure the Internet side MAC address.
Note: Configuring an improper MAC address may make the AirStation
unusable. Change this setting at your own risk.
MTU size of Internet Port
Configure the MTU value of the Internet port from the range of 578
to 1500 bytes.
Page 33 / 109
WCR-GN User Manual
32
Chapter 4
Configuration
PPPoE (Router Mode only)
The screen to configure PPPoE settings.
Parameter
Meaning
Name of Connection
Enter the name to identify the connected destination. You may
enter up to 32 alphanumerical characters and symbols.
User Name
Set the user name which is specified by your provider, used for
a PPPoE certification. You may enter up to 32 alphanumerical
characters and symbols.
Password
Set the password specified by your provider for PPPoE certification.
You may enter up to 32 alphanumerical characters and symbols.
Service Name
Fill in this field only when your provider specifies a Service Name.
Leave blank otherwise. You may enter up to 32 alphanumerical
characters and symbols.
Connection Type
Specifies the timing for the AirStation to connect to your provider.
Page 34 / 109
Chapter 4
Configuration
WCR-GN User Manual
33
Parameter
Meaning
Automatic disconnection
Sets the timer for disconnection if the connection method is set
to“Connect on Demand”or“Manual”. You can enter up to 1440
minutes.
Authorization
Configure an authorization method with a provider.
MTU Size
Configure MTU value in the range of 578 to 1492, which is used for
communication on PPPoE.
MRU size
Configure MRU (Maximum Receive Unit) value in the range of 578
to 1492, which is used for communication on PPPoE.
Keep Alive
The AirStation will request LCP echo to the PPP server once in a
minute. Internet connection will be automatically cut off if the
connection server does not respond for more than 6 minutes.
Disable this function if the PPP connection is cut at short intervals.
Page 35 / 109
WCR-GN User Manual
34
Chapter 4
Configuration
DDNS (Router Mode only)
The screen to configure Dynamic DNS settings.
Parameter
Meaning
Dynamic DNS Service
Select a provider (DynDNS or TZO) for Dynamic DNS.
User Name
* Only when DynDNS is selected
Enter the user name which is registered to the Dynamic DNS
service. You may enter up to 64 alphanumerical characters and
symbols.
Password
* Only when DynDNS is selected
Enter the user name which is registered to the Dynamic DNS
service. You may enter up to 64 alphanumerical characters and
symbols.
Host Name
* Only when DynDNS is selected
Enter the host name which is registered to the Dynamic DNS
service. You may enter up to 255 alphanumerical characters,
hyphens, and periods.
Email Address
* Only when selecting TZO
Enter the email address which is registered to the Dynamic DNS
service. You may enter up to 64 alphanumerical characters and
symbols.
TZO Key
* Only when selecting TZO
Enter the TZO Key which is registered to the Dynamic DNS service.
You may enter up to 64 alphanumerical characters and symbols.
19216811.live