1. Home
    2. /
  2. Manuals
    3. /
  3. Billion
    4. /
  4. BiPAC-7800NL
    5. /
  5. 12
Page 56 / 166 Scroll up to view Page 51 - 55
52
WAN – Main Port (EWAN)
Besides using ADSL to get connected to the Internet, EWAN port of BiPAC 7800(N) can be used
as an alternative to connect to Cable Modems, VDSL and fiber optic lines. This alternative not only
provides faster connection to the Internet, it also provides users with more flexibility to get online.
PPPoE (EWAN)
Username:
Enter the username provided by your ISP. You can input up to 256 alphanumeric
characters (case sensitive).
Password:
Enter the password provided by your ISP. You can input up to 32 alphanumeric characters
(case sensitive).
Service Name:
This item is for identification purposes. If it is required, your ISP will provide you the
necessary information. Maximum input is 32 alphanumeric characters.
Auth. Protocol:
Default is Auto. Please consult your ISP on whether to use Chap, Pap or MSCHAP.
IP Address:
Enter your fixed IP address.
Obtain DNS automatically:
Click to activate DNS and to enable the system to automatically detect
DNS.
Primary DNS / Secondary DNS:
Enter the IP addresses of the DNS servers. The DNS servers are
passed to the DHCP clients along with the IP address and the netmask.
MTU:
Maximum Transmission Unit.
The size of the largest datagram (excluding media-specific
headers) that IP will attempt to send through the interface.
Page 57 / 166
53
VLAN Mux:
check whether to enable VLAN Mux function.
802.1Q VLAN ID:
It is a parameter to specify the VLAN which the frame belongs. Enter the VLAN
ID identification, tagged: 2-4095.
IPv6:
check to enable IPv6 service. Enter IPv6 Gateway address and set IPv6 DNS as same in IPv4
mode.
IPv6 Address:
type the IPv6 address from your ISP, or get it automatically. ” ::” means to obtain IPv6
address automatically.
Obtain IPv6 DNS:
check Automatic to obtain DNS automatically. If not, please type the concrete
ones in the Primary and Secondary fields.
Click Apply to confirm the settings.
Obtain IP Address Automatically (EWAN)
Select this protocol enables the device to automatically retrieve IP address.
Obtain DNS automatically:
Click to activate DNS and to enable the system to automatically detect
DNS.
Primary DNS / Secondary DNS:
Enter the IP addresses of the DNS servers. The DNS servers are
passed to the DHCP clients along with the IP address and the netmask.
VLAN Mux:
check whether to enable VLAN Mux function.
802.1Q VLAN ID:
It is a parameter to specify the VLAN which the frame belongs. Enter the VLAN
ID identification, tagged: 2-4095.
IPv6:
Check to enble the function
IPv6 Gateway:
Enter the IP address of the default IPv6 gateway.
Page 58 / 166
54
Fixed IP Address (EWAN)
IP Address:
Enter your fixed IP address.
Netmask:
User can change it to others such as 255.255.255.128. Type the netmask assigned to
you by your ISP (if given).
Gateway:
Enter the IP address of the default gateway.
Obtain DNS automatically:
Click to activate DNS and to enable the system to automatically detect
DNS.
Primary DNS / Secondary DNS:
Enter the IP addresses of the DNS servers. The DNS servers are
passed to the DHCP clients along with the IP address and the netmask.
VLAN Mux:
check whether to enable VLAN Mux function.
802.1Q VLAN ID:
It is a parameter to specify the VLAN which the frame belongs. Enter the VLAN
ID identification, tagged: 2-4095.
IPv6:
Check to enble the function.
IP/Prefix Length:
Enter IP Address and Prefix length.
IPv6 Gateway:
Enter the IP address of the default IPv6 gateway.
Primary DNS / Secondary DNS:
Enter the IP addresses of the DNS servers. The DNS servers are
passed to the DHCP clients along with the IP address and the netmask.
Page 59 / 166
55
Pure Bridge (EWAN)
VLAN Mux:
check whether to enable VLAN Mux function.
802.1Q VLAN ID:
It is a parameter to specify the VLAN which the frame belongs. Enter the VLAN
ID identification, tagged: 2-4095.
Click Apply to confirm the settings.
Page 60 / 166
WLAN (only for BiPAC 7800N)
WPA / WPA2
Wireless Parameters
WLAN Service:
Default setting is set to Enable.
If you do not have any wireless, select Disable.
ESSID:
The ESSID is the unique name of a wireless access point (AP) used to distinguish one from
another. For security propose, change to a unique ID name which is already built into the router
wireless interface. It is case sensitive and must not exceed 32 characters. Make sure your wireless
clients have exactly the ESSID as the device in order to connect to your network.
Hide ESSID:
This function enables the router to become invisible on the network. Thus, any clients
using the wireless setting to search for available or specific router on the network will not be able
to discover the router whose Hide ESSID function is set to enabled. The default setting is disabled.
Regulation Domain:
There are seven Regulation Domains for you to choose from, including North
America (N.America), Europe, France, etc. The Channel ID will be different based on this setting.
Channel ID:
Select the wireless connection channel ID that you would like to use.
Note: Wireless performance may degrade if the selected channel ID is already being occupied
by other AP(s).
Security
Parameters
Security Mode:
You can disable or enable with WPA or WEP to protect wireless network. The
default mode of wireless security is
Disable
.
RADIUS/802.1x:
You can disable or enable the RADIUS service.
WPA Shared Key:
The key for
network authentication. The input format is in character style and key
size should be in the range between 8 and 63 characters.
56

Rate

4 / 5 based on 1 vote.

Popular Billion Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top