1. Home
    2. /
  2. Manuals
    3. /
  3. Billion
    4. /
  4. BiPAC-7800NL
    5. /
  5. 11
Page 51 / 166 Scroll up to view Page 46 - 50
47
PPPoA Connection (ADSL)
PPPoA stands for Point to Point Protocol over ATM Adaptation Layer 5 (AAL5). It provides access
control and billing functionality in a manner similar to dial-up services using PPP.
IP TV / VOD applications:
The predefined WAN settings for users. Users can adopt the appropriate
one base on need.
VPI/VCI:
Enter the information provided by your ISP.
Username:
Enter the username provided by your ISP. You can input up to 256 alphanumeric
characters (case sensitive).
Password:
Enter the password provided by your ISP. You can input up to 32 alphanumeric characters
(case sensitive).
Encap. method:
Select the encapsulation format. Select the one provided by your ISP.
Auth. Protocol:
Default is Auto. Please consult your ISP on whether to use Chap, Pap or MSCHAP.
IP Address(0.0.0.0:Auto):
Your WAN IP address. Leave the IP address as 0.0.0.0 to enable the
device to automatically obtain an IP address from your ISP.
Obtain DNS automatically:
Click to activate DNS and to enable the system to automatically detect
DNS.
Page 52 / 166
Primary DNS / Secondary DNS:
Enter the IP addresses of the DNS servers. The DNS servers are
passed to the DHCP clients along with the IP address and the netmask.
MTU:
Maximum Transmission Unit.
The size of the largest datagram (excluding media-specific
headers) that IP will attempt to send through the interface.
IPv6:
check to enable IPv6 service. If enabled, please set the IPv6 Address, Ipv6 DNS, similar as
IPv4.
IPv6 Address:
type the IPv6 address from your ISP, or get it automatically. ”::” means to obtain IPv6
address automatically.
Obtain IPv6 DNS:
check Automatic to obtain DNS automatically. If not, please type the exact ones
in the Primary and secondary fields.
Click Apply to confirm the settings.
MPoA Connection (ADSL)
48
Page 53 / 166
49
IP TV / VOD applications:
The predefined WAN settings for users. Users can adopt the appropriate
one base on need.
VPI/VCI:
Enter the VPI and VCI information provided by your ISP.
Encap. method:
Select the encapsulation format. Select the one provided by your ISP.
IP Address:
Your WAN IP address. If the IP is set to 0.0.0.0 (auto IP detect), both netmask and
gateway may be left blank.
Netmask:
User can change it to others such as 255.255.255.128. Type the netmask assigned to
you by your ISP (if given).
Gateway:
Enter the IP address of the default gateway.
Obtain DNS automatically:
Click to activate DNS and to enable the system to automatically detect
DNS.
Primary DNS / Secondary DNS:
Enter the IP addresses of the DNS servers. The DNS servers are
passed to the DHCP clients along with the IP address and the netmask.
IPv6:
check to enable IPv6 service. If enabled, please set the IPv6 Address, Ipv6 DNS, similar as
IPv4.
IP/Prefix Length:
please type the IP and the prefix length for the IPv6 address from your ISP.
IPv6 Gateway:
Type the gateway to which the WAN packets are forwarded.
Obtain IPv6 DNS:
check Automatic to obtain DNS automatically. If not, please type the concrete
ones in the Primary and Secondary fields.
Click Apply to confirm the settings.
Page 54 / 166
50
IPoA Connections (ADSL)
IP TV / VOD applications:
The predefined WAN settings for users. Users can adopt the appropriate
one base on need.
VPI/VCI:
Enter the VPI and VCI information provided by your ISP.
Encap. method:
Select the encapsulation format. Select the one provided by your ISP.
IP Address:
Enter your fixed IP address.
Netmask:
User can change it to others such as 255.255.255.128. Type the netmask assigned to
you by your ISP (if given).
Gateway:
Enter the IP address of the default gateway.
Obtain DNS automatically:
Click to activate DNS and to enable the system to automatically detect
DNS.
Primary DNS / Secondary DNS:
Enter the IP addresses of the DNS servers. The DNS servers are
passed to the DHCP clients along with the IP address and the netmask.
Click Apply to confirm the settings.
Page 55 / 166
51
Pure Bridge Connections (ADSL)
IP TV / VOD applications:
The predefined WAN settings for users. Users can adopt the appropriate
one base on need.
VPI/VCI:
Enter the VPI and VCI information provided by your ISP.
Encap. method:
Select the encapsulation format. Select the one provided by your ISP.
Click Apply to confirm the settings.

Rate

4 / 5 based on 1 vote.

Popular Billion Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top