Page 46 / 166
Scroll up to view Page 41 - 45
Fixed IP Address
IP Address:
Enter your fixed IP address.
Netmask:
User can change it to others such as 255.255.255.128. Type the netmask assigned to
you by your ISP (if given).
Gateway:
Enter the IP address of the default gateway.
Obtain DNS automatically:
Click to activate DNS and to enable the system to automatically
detect DNS.
Primary DNS / Secondary DNS:
Enter the IP addresses of the DNS servers. The DNS servers
are passed to the DHCP clients along with the IP address and the netmask.
VLAN Mux:
check whether to enable VLAN Mux function.
802.1Q VLAN ID:
It is a parameter to specify the VLAN which the frame belongs. Enter the VLAN
ID identification, tagged: 2-4095.
IPv6:
Check to enble the function.
IP/Prefix Length:
Enter IP Address and Prefix length.
IPv6 Gateway:
Enter the IP address of the default IPv6 gateway.
Obtain IPv6 DNS:
Click to activate DNS and to enable the system to automatically detect DNS.
Primary DNS / Secondary DNS:
Enter the IP addresses of the DNS servers. The DNS servers are
passed to the DHCP clients along with the IP address and the netmask.
42
Page 47 / 166
43
Pure Bridge
VLAN Mux:
check whether to enable VLAN Mux function.
802.1Q VLAN ID:
It is a parameter to specify the VLAN which the frame belongs. Enter the VLAN
ID identification, tagged: 2-4095.
Page 48 / 166
44
Basic Configuration Mode
Status
Device Information
Model Name:
Provide a name for the router for identification purposes.
System Up-Time:
Record system up-time.
Hardware Version:
Device version.
Software Version:
Firmware version.
Port Status
Port Status:
User can look up to see if they are connected to Ethernet, EWAN, ADSL and Wireless.
WAN
Port:
Name of the WAN connection.
Protocol VPI/VCI:
Virtual Path Identifier and Virtual Channel Identifier.
Operation:
Current status in WAN interface.
Connection:
Current connection time.
IP Address:
WAN port IP address.
Netmask:
WAN port IP subnet mask.
Gateway:
IP address of the default gateway.
Primary DNS:
IP address of the primary DNS server.
Page 49 / 166
45
WAN – Main Port (ADSL)
A WAN (Wide Area Network) is an outside connection to another network or the Internet.
PPPoE Connection (ADSL)
PPPoE (PPP over Ethernet) provides access control in a manner similar to dial-up services using
PPP.
IP TV / VOD applications:
The predefined WAN settings for users. Users can adopt the appropriate
one base on need.
VPI/VCI:
Enter the information provided by your ISP.
Username:
Enter the username provided by your ISP. You can input up to 256 alphanumeric
characters (case sensitive).
Password:
Enter the password provided by your ISP. You can input up to 32 alphanumeric characters
(case sensitive).
Service Name:
This item is for identification purposes. If it is required, your ISP will provide you the
necessary information. Maximum input is 32 alphanumeric characters.
Encap. method:
Select the encapsulation format. Select the one provided by your ISP.
Page 50 / 166
46
Auth. Protocol:
Default is Auto. Please consult your ISP on whether to use Chap, Pap or MSCHAP.
IP Address(0.0.0.0:Auto):
Your WAN IP address. Leave this at 0.0.0.0 to obtain automatically an
IP address from your ISP.
Obtain DNS automatically:
Click to activate DNS and to enable the system to automatically detect
DNS.
Primary DNS / Secondary DNS:
Enter the IP addresses of the DNS servers. The DNS servers are
passed to the DHCP clients along with the IP address and the netmask.
MTU:
Maximum Transmission Unit.
The size of the largest datagram (excluding media-specific
headers) that IP will attempt to send through the interface.
IPv6:
check to enable IPv6 service. If enabled, please set the IPv6 Address, Ipv6 DNS, similar as
IPv4.
IPv6 Address:
type the IPv6 address from your ISP, or get it automatically. ”::” means to obtain IPv6
address automatically.
Obtain IPv6 DNS:
check Automatic to obtain DNS automatically. If not, please type the exact ones
in the Primary and secondary fields.
Click Apply to confirm the settings.
19216811.live