Page 31 / 166 Scroll up to view Page 26 - 30
27
Quick Start
ADSL Mode
Step 1: Select WAN port connect mode from the connect mode drop down menu. There are two
types of connect mode to choose from: ADSL or EWAN.
Here select
ADSL
and click
Continue
. If
you only want to configure Wireless, press
Jump to Wireless setting
.
Step 2: When ADSL line is not ready, the screen1 below will appear to remind you. Then you should
connect the ADSL line. While ADSL line is ready, the screen 2 below will appear to let you go
on.Here you can select Auto or Manually. Select
Auto
will go to step 3, and select
Manually
will go
to step 4.
Screen1
Screen 2
Page 32 / 166
Step3: Wait while the DSL is scanning, when the scanning is OK, the scanning result will appear,
see screen 3, and then it will quickly goes to step 4. Or you can
Abort to manually setting
to step
4.
Screen 3
Step 4: There are 5 types of connection protocols available under ADSL connect mode .
Each type
of connection mode is described in the following sections of ADSL Connect mode.
Select the
needed protocol and enter the needed information from your ISP.
28
Page 33 / 166
Step 5:
The device will reboot and then load the new configuration.
Step 6: WAN port configuration is success. And if you want contiune configuring wireless, press
Next to Wireless
button to go on.
Step 7: Enter the ESSID, select the Channel ID and the Security Mode, click
Continue
to go on. For
detail, please turn to
WLAN
in this manual for help.
29
Page 34 / 166
Step 8: Quick Star is finished.
You can go to the Status and view the basic information.
30
Page 35 / 166
31
ADSL Connect Mode
For ADSL connect mode there are 5 types of connection protocols:
PPPoE, PPPoA, IPoA, MPoA
and
Pure Bridge
.
PPPoE
IP TV / VOD applications:
The predefined WAN settings for users. Users can adopt the appropriate
one base on need.
VPI/VCI:
Enter the information provided by your ISP.
Username:
Enter the username provided by your ISP. You can input up to 256 alphanumeric
characters (case sensitive).
Password:
Enter the password provided by your ISP. You can input up to 32 alphanumeric characters
(case sensitive).
Service Name:
This item is for identification purposes. If it is required, your ISP will provide you the
necessary information. Maximum input is 32 alphanumeric characters.
Encapsulation method:
Select the encapsulation format. Select the one provided by your ISP.
Authentication method:
Default is Auto. Please consult your ISP on whether to use Chap, Pap or
MSCHAP.
IP Address:
Your WAN IP address. Leave the IP address as 0.0.0.0 to enable the device to
automatically obtain an IP address from your ISP.
Obtain DNS Automatically:
Click to activate DNS and to enable the system to automatically detect
DNS.
Primary DNS / Secondary DNS:
Enter the IP addresses of the DNS servers. The DNS servers are
passed to the DHCP clients along with the IP address and the netmask.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top