Fixed IP Address

IP Address:

Enter your fixed IP address.

Netmask:

User can change it to others such as 255.255.255.128. Type the netmask assigned to

you by your ISP (if given).

Gateway:

Enter the IP address of the default gateway.

Obtain DNS automatically:

Click to activate DNS and to enable the system to automatically

detect DNS.

Primary DNS / Secondary DNS:

Enter the IP addresses of the DNS servers. The DNS servers

are passed to the DHCP clients along with the IP address and the netmask.

VLAN Mux:

check whether to enable VLAN Mux function.

802.1Q VLAN ID:

It is a parameter to specify the VLAN which the frame belongs. Enter the VLAN

ID identification, tagged: 2-4095.

IPv6:

Check to enble the function.

IP/Prefix Length:

Enter IP Address and Prefix length.

IPv6 Gateway:

Enter the IP address of the default IPv6 gateway.

Obtain IPv6 DNS:

Click to activate DNS and to enable the system to automatically detect DNS.

Primary DNS / Secondary DNS:

Enter the IP addresses of the DNS servers. The DNS servers are

passed to the DHCP clients along with the IP address and the netmask.

42

43

Pure Bridge

VLAN Mux:

check whether to enable VLAN Mux function.

802.1Q VLAN ID:

It is a parameter to specify the VLAN which the frame belongs. Enter the VLAN

ID identification, tagged: 2-4095.

44

Basic Configuration Mode

Status

Device Information

Model Name:

Provide a name for the router for identification purposes.

System Up-Time:

Record system up-time.

Hardware Version:

Device version.

Software Version:

Firmware version.

Port Status

Port Status:

User can look up to see if they are connected to Ethernet, EWAN, ADSL and Wireless.

WAN

Port:

Name of the WAN connection.

Protocol VPI/VCI:

Virtual Path Identifier and Virtual Channel Identifier.

Operation:

Current status in WAN interface.

Connection:

Current connection time.

IP Address:

WAN port IP address.

Netmask:

WAN port IP subnet mask.

Gateway:

IP address of the default gateway.

Primary DNS:

IP address of the primary DNS server.

45

WAN – Main Port (ADSL)

A WAN (Wide Area Network) is an outside connection to another network or the Internet.

PPPoE Connection (ADSL)

PPPoE (PPP over Ethernet) provides access control in a manner similar to dial-up services using

PPP.

IP TV / VOD applications:

The predefined WAN settings for users. Users can adopt the appropriate

one base on need.

VPI/VCI:

Enter the information provided by your ISP.

Username:

Enter the username provided by your ISP. You can input up to 256 alphanumeric

characters (case sensitive).

Password:

Enter the password provided by your ISP. You can input up to 32 alphanumeric characters

(case sensitive).

Service Name:

This item is for identification purposes. If it is required, your ISP will provide you the

necessary information. Maximum input is 32 alphanumeric characters.

Encap. method:

Select the encapsulation format. Select the one provided by your ISP.

46

Auth. Protocol:

Default is Auto. Please consult your ISP on whether to use Chap, Pap or MSCHAP.

IP Address(0.0.0.0:Auto):

Your WAN IP address. Leave this at 0.0.0.0 to obtain automatically an

IP address from your ISP.

Obtain DNS automatically:

Click to activate DNS and to enable the system to automatically detect

DNS.

Primary DNS / Secondary DNS:

Enter the IP addresses of the DNS servers. The DNS servers are

passed to the DHCP clients along with the IP address and the netmask.

MTU:

Maximum Transmission Unit.

The size of the largest datagram (excluding media-specific

headers) that IP will attempt to send through the interface.

IPv6:

check to enable IPv6 service. If enabled, please set the IPv6 Address, Ipv6 DNS, similar as

IPv4.

IPv6 Address:

type the IPv6 address from your ISP, or get it automatically. ”::” means to obtain IPv6

address automatically.

Obtain IPv6 DNS:

check Automatic to obtain DNS automatically. If not, please type the exact ones

in the Primary and secondary fields.

Click Apply to confirm the settings.