Page 136 / 168
Scroll up to view Page 131 - 135
133
Add Enrollee with PBC Method
1. Select radio button “Push-Button” and Click
Or Press the physical button on
router.
Page 137 / 168
134
2. Operate Station to start WPS Adding Enrollee. Launch the wireless client’s WPS Utility (eg.
Ralink Utility). Set the Config Mode as Enrollee. Then press the WPS button and choose the
correct AP (eg. wlan-ap) from the WPS AP List section before pressing the PBC button to run the
scan.
Page 138 / 168
135
3. When the PBC button is pushed, a wireless communication will be established between your
router and the PC. The client’s SSID and security setting will now be configured to match the SSID
and security setting of the router.
Page 139 / 168
136
Configure AP as Enrollee
Add Registrar with PIN Method
1. Set AP to “Unconfigured Mode” and Click “Config AP” button.
Page 140 / 168
137
2. Launch the wireless client’s WPS utility (eg. Ralink Utility). Set the Config Mode as Registrar.
Enter the PIN number (76229909 for example) in the PIN Code column then choose the correct AP
(eg. wlan-ap) from the WPS AP List section before pressing the PIN button to run the scan.
19216811.live