Page 116 / 168
Scroll up to view Page 111 - 115
113
Step 5:
Select Show icon in notification area when connected option and click OK. An icon displays
in the system tray
Step 6:
Double-click on the icon to display your current Internet connection status.
Page 117 / 168
114
Web Configurator Easy Access
With UPnP, you can access web-based configuration for the BiPAC 7700N without first finding out
the IP address of the router. This helps if you do not know the router’s IP address.
Follow the steps below to access web configuration.
Step 1:
Click Start and then Control Panel.
Step 2:
Double-click Network Connections.
Step 3:
Select My Network Places under Other Places.
Step 4:
An icon describing each UPnP-enabled device shows under Local Network.
Step 5:
Right-click on the icon of your BiPAC 7700N and select Invoke. The web configuration login
screen displays.
Step 6:
Right-click on the icon of your BiPAC 7700N and select Properties. A properties window
displays basic information about the BiPAC 7700N.
Page 118 / 168
115
DNS Proxy
DNS proxy is used to forward request and response message between DNS Client and DNS Server.
Hosts in LAN can use router serving as a DNS proxy to connect to the DNS Server in public to
correctly resolve Domain name to access the internet.
DNS Proxy:
select whether to enable or disable DNS Proxy function, default is enabled.
Host name of the Broadband Router:
enter the host name of the router. Default is home.gateway.
Domain name of the LAN network:
enter the domain name of the LAN network. home.gateway.
Page 119 / 168
116
Interface Grouping
Interface grouping is a function to group interfaces, known as VLAN. A Virtual LAN, commonly known
as a VLAN, is a group of hosts with the common set of requirements that communicate as if they were
attached to the same broadcast domain, regardless of the physical location. A VLAN has the same
attributes as a physical LAN, but it allows for end stations to be grouped together even if they are not
located on the same network switch.
Click
Add
to add groups. But note that the maximum number can be 16.
Page 120 / 168
117
Group Name:
type a group name.
WAN interface used in the grouping
: select from the drop-down box the WAN interface you want
to applied in the group.
Grouped LAN Interfaces:
select the LAN interfaces you want to group as a single group from
Available LAN Interfaces
.
Automatically Add Clients With following DHCP Vendor IDs:
enter the DHCP Vendor IDs for
which you want the Clients automatically added into the group. DHCP vendor ID (DHCP 60) is an
Authentication for DHCP Messages.
19216811.live