19216811.liveBillion BiPAC 7402NX(L) 802.11n 3G/ADSL2+ (VPN) Firewall Router
Chapter 4: Configuration
92
MSN (7001)
UDP(17)
7001
7001
YES
YES
N/A
N/A
N/A
N/A
MSN
VEDIO
(9000)
TCP(6)
9000
9000
NO
YES
N/A
N/A
N/A
N/A
Inbound:
Internet to LAN ;
Outbound:
LAN to Internet.
YES:
Allowed ;
NO:
Blocked ;
N/A:
Not Applicable
Packet Filter – Add TCP/UDP Filter
Rule Name:
Users-define description to identify this entry or click “
Select” drop-down menu
to select
existing predefined rules. The maximum name length is 32 characters.
IP version:
select IPv4 or IPv6.
Time Schedule:
It is self-defined time period.
You may specify a time schedule for your prioritization
policy. For setup and detail, refer to
Time Schedule
section
Source IP Address(es) / Destination IP Address(es):
This is the Address-Filter used to allow or block
traffic to/from particular IP address(es). Selecting the
Subnet Mask
of the IP address range you wish to
allow/block the traffic to or form; set IP address and Subnet Mask to
0.0.0.0
to inactive the Address-Filter
rule.
Tip:
To block access, to/from a single IP address, enter that IP address as the
Host IP Address
and use
a
Host Subnet Mask
of “255.255.255.255”.
Source Port:
This Port or Port Ranges defines the port allowed to be used by the Remote/WAN to
connect to the application. Default is set from range
0 ~ 65535.
It is recommended that this option be
configured by an advanced user.
Destination Port:
This is the Port or Port Ranges that defines the application.
Type:
It is the packet protocol type used by the application, select
TCP
,
UDP
or both
TCP/UDP
.
Protocol
Number:
Insert the port number.
Inbound / Outbound:
Select
Allow
or
Block
the access to the Internet (
“Outbound”
) or from the
Internet (
“Inbound”
).
Click
Add
button to apply your changes.