Page 86 / 165
Scroll up to view Page 81 - 85
Billion BiPAC 7402NX(L) 802.11n 3G/ADSL2+ (VPN) Firewall Router
Chapter 4: Configuration
82
Remote Access
To temporarily permit remote administration of the router (i.e. from outside your LAN), select a time period
the router will permit remote access for and click
Enable.
You may change other configuration options for
the web administration interface using
Device Management
options in the
Advanced
section of the GUI.
If you wish to permanently enable remote access, choose a time period of
0
minute.
Firmware Upgrade
Your router’s “firmware” is the software that allows it to operate and provides all its functionality. Think of
your router as a dedicated computer, and the firmware as the software it runs. Over time this software
may be improved and revised, and your router allows you to upgrade the software it runs to take
advantage of these changes.
Clicking on
Browse
will allow you to select the new firmware image file you have downloaded to your PC.
Once the correct file is selected, click Upgrade to update the firmware in your router.
Page 87 / 165
Billion BiPAC 7402NX(L) 802.11n 3G/ADSL2+ (VPN) Firewall Router
Chapter 4: Configuration
83
Backup / Restore
These functions allow you to save and backup your router’s current settings to a file on your PC, or to
restore a previously saved backup. This is useful if you wish to experiment with different settings,
knowing that you have a backup handy in the case of any mistakes. It is advisable to backup your router’s
settings before making any significant changes to your router’s configuration.
Press
Backup
to select where on your local PC to save the settings file. You may also change the name
of the file when saving if you wish to keep multiple backups.
Press
Browse
to select a file from your PC to restore. You should only restore settings files that have
been generated by the Backup function, and that were created when using the
current version
of the
router’s firmware.
Settings files saved to your PC should not be manually edited in any way.
After selecting the settings file you wish to use, pressing
Restore
will load those settings into the router.
Page 88 / 165
Billion BiPAC 7402NX(L) 802.11n 3G/ADSL2+ (VPN) Firewall Router
Chapter 4: Configuration
84
Restart Router
Click
Restart
with option
Current Settings
to reboot your router (and restore your last saved
configuration).
If you wish to restart the router using the factory default settings (for example, after a firmware upgrade or
if you have saved an incorrect configuration), select
Factory Default Settings
to reset to factory default
settings.
You may also reset your router to factory settings by holding the small Reset pinhole button more than 6
seconds on the back of your router.
Caution:
After pressing the RESET button for more than 6 seconds, to be sure you power cycle the device again.
Page 89 / 165
Billion BiPAC 7402NX(L) 802.11n 3G/ADSL2+ (VPN) Firewall Router
Chapter 4: Configuration
85
User Management
In order to prevent unauthorized access to your router’s configuration interface, it requires all users to
login with a password. You can set up multiple user accounts, each with their own password.
You are able to
Edit
existing users and
Add
new users who are able to access the device’s configuration
interface. Once you have clicked on
Edit,
you are shown the following options:
You can change the user’s
password
, whether their account is active and
valid
, as well as add a
comment to each user account. Click Edit/Delete button to save your revise. You cannot delete the
default admin account, if you do you will be log out. However, you can delete any other created accounts
by clicking
Delete
when editing the user. You are strongly advised to change the password on the default
“
admin
” account when you receive your router, and any time you reset your configuration to Factory
Defaults.
Page 90 / 165
Billion BiPAC 7402NX(L) 802.11n 3G/ADSL2+ (VPN) Firewall Router
Chapter 4: Configuration
86
When you create a user account, you check Valid to fill in the blank with User, Comment, Password and
Confirm Password. Later, click
Add
button to add your new user account.
For deleting the user account, you choose Delete option. In the end, you click
Edit/Delete
button to
delete the chosen user account.
19216811.live