PPPoE

With EZSO built-in, you can simply plug cables in as first installation and turn on host

computer to surf Internet through WEB browser like IE. You do not need to login into the

router and search the router’s WEB GUI configuration page to find out the right web page for

configuring your PPPoE/PPPoA credentials. EZSO feature in Billion’s routers will do it for

you.

When you are trying to surf the internet through WEB browser, the PPPoE dialogue will be

visible and nothing but that. After you have successfully submitting the credentials,

everything will be fine and work neatly.

1.

Please wait when the connection is trying.

2.

Enter the username and password provide

by your ISP.

3.

If login failed, Please input the correct

username and password again.

4.

Login Successfully.

19

PPPoA

1.

Please wait when the connection is trying.

2.

Enter the username and password provide

by your ISP.

3.

If login failed, Please input the correct

username and password again.

4.

Login Successfully.

20

DHCP

With this method, user does not need to access router to configure it and set lot of

parameters. Besides, it eliminates the complicated way to configure the device and will

definitely

reduce

the

service

call

from

users.

1.

Please wait when the connection is trying.

2.

Login Successfully.

Web Configuator:

Open your web browser, enter the IP address of your router, which by default is

192.168.1.254

, and click “

Go

”, a user name and password window prompt appears.

The

default username and password are “admin” and “admin”.

Congratulations! You have successfully logged on to your BiPAC 7300(G) ADSL2+

Router!

21

Chapter 4

Configuration

Once you have logged on to your BiPAC 7300(G) ADSL2+ Router via your web browser, you

can begin to set it up according to your requirements. On the configuration homepage, the

left navigation pane links you directly to the setup pages, which include:

Status

(ARP Table, Wireless Association, Routing Table, DHCP Table, System Log,

Security Log)

Quick Start

Configuration

(LAN, WAN, System, Firewall, QoS, Virtual Server and Advanced)

Save Config to FLASH

The following sections provide an overview of the settings available for configuring your

router by Billion.

22

4.1 Status

23