Page 21 / 67
Scroll up to view Page 16 - 20
Configuring the Network Properties
Configuring PC in Windows XP
1.
Go to
Start / Control Panel (in Classic
View)
. In the Control Panel, double-click
on
Network Connections
2.
Double-click
Local Area Connection
.
3.
In the
Local Area Connection Status
window, click
Properties
.
4.
Select
Internet Protocol (TCP/IP)
and
click
Properties
.
5.
Select the
Obtain an IP address
automatically
and
the
Obtain DNS
server address automatically
radio
buttons.
6.
Click
OK
to finish the configuration.
19
Page 22 / 67
Configuring PC in Windows 2000
1.
Go to
Start / Settings / Control Panel
.
In the Control Panel, double-click on
Network
and Dial-up Connections
.
2.
Double-click
Local Area Connection
.
3.
In the
Local Area Connection Status
window click
Properties
.
4.
Select
Internet Protocol (TCP/IP)
and
click
Properties
.
5.
Select the
Obtain an IP address
automatically
and
the
Obtain DNS
server address automatically
radio
buttons.
6.
Click
OK
to finish the configuration.
20
Page 23 / 67
Configuring PC in Windows 98/Me
1
.Go to
Start / Settings / Control Panel
.
In the Control Panel, double-click on
Network
and choose the
Configuration
tab.
2.
Select
TCP/IP ->NE2000 Compatible
,
or the name of your Network Interface
Card (NIC) in your PC.
3.
Select the
Obtain an IP address
automatically
radio button.
4.
Then select the
DNS Configuration
tab.
5.
Select the
Disable DNS
radio button
and click
OK
to finish the configuration.
21
Page 24 / 67
Configuring PC in Windows NT4.0
1.
Go to
Start / Settings / Control Panel
.
In the Control Panel, double-click on
Network
and choose the
Protocols
tab.
2.
Select
TCP/IP Protocol
and click
Properties
.
3.
Select the
Obtain an IP address from a
DHCP server
radio button and click
OK
.
If you configuring the Network Properties through USB
Port, please be note to specify a DNS IP address in PC and
do not use “Obtain DNS server address automa
tically”
22
Page 25 / 67
3.2 Factory Default Settings
Before configuring your, you need to know the following default settings.
Web Interface:
Username: admin
Password: admin
LAN Device IP Settings:
Subnet Mask: 255.255.255.0
ISP setting in WAN site:
PPPoE
DHCP server:
DHCP server is enabled.
Start IP Address: 192.168.1.100
IP pool counts: 100
3.2.1 Username and Password
The default username and password are “
admin
” and “
admin
” respectively.
Attention
Attention
If you ever forget the password to log in, you may press the RESET
button up to 6 seconds to restore the factory default settings.
23
19216811.live