Page 111 / 308
Scroll up to view Page 106 - 110
106
4. The client’s SSID and security settings will now be configured to match the SSID and security
settings of the registrar.
You can check the message in the red ellipse with the security parameters you set, here we all use
the default.
Page 112 / 308
107
Configure AP as Enrollee
Add Registrar with PIN Method
1. Set AP to “
Unconfigured Mode
”
Page 113 / 308
108
2. Launch the wireless client’s WPS utility (eg. Ralink Utility). Set the Config Mode as
Registrar
.
Enter the
PIN
number (13076542 (device) for example) in the PIN Code column then choose the
correct AP (eg. wlan-ap-2.4g) from the WPS AP List section before pressing the PIN button to run
the scan.
Page 114 / 308
109
3. The router’s (AP’s) SSID and security setting will now be configured to match the SSID and
security setting of the registrar.
4. Do Web Page refresh after ER complete AP Configuration to check the new parameters setting.
Page 115 / 308
110
MAC Filter
Select SSID:
Select the SSID you want this filter applies to.
MAC Restrict Mode:
Disable:
disable the MAC Filter function.
Allow
: allow the hosts with the following listed MACs to access the wireless network.
Deny
: deny the hosts with the following listed MACs to access the wireless network.
Click
Add
to add the MACs.
MAC Address:
Enter the MAC address(es) or select the MAC address(es). The format of MAC
address could be: xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx.
Click
Apply
to apply your settings and the item will be listed below.
.
19216811.live