Billion BiPAC 7800VDOX Router Manual PDF (Setup & Configuration Guide)

Page 106 / 308 Scroll up to view Page 101 - 105

101



WPA2

WPA2 Preauthentication:

When a wireless client wants to handoff to another AP, with

preauthentication, it can perform 802.1X authentication to the new AP, and when handoff happens,

this mode will help reduce the association time.

Network Re-auth Interval:

the interval for network Re-authentication. This is in seconds.

WPA Group ReKey Internal:

The period of renewal time for changing the security key automatically

between wireless client and Access Point (AP). This is in seconds.

RADIUS Server IP Address:

RADIUS( Remote Authentication Dial In User Service), Enter the

IP address of RADIUS authentication server. This is in seconds.

RADIUS Server Port:

Enter the port number of RADIUS authentication server here.

RADIUS Key:

Enter the password of RADIUS authentication server.

WPA/WAPI Encryption:

There are two Algorithms, AES (Advanced Encryption Standard) and

TKIP(Temporal Key Integrity Protocol) which help to protect the wireless communication.



Mixed WPA2/WPA

WPA2 Preauthentication:

When a wireless client wants to handoff to another AP, with

preauthentication, it can perform 802.1X authentications to the new AP, and when handoff happens,

this mode will help reduce the association time used.

Network Re-auth Interval:

the interval for network Re-authentication. The unit is second.

WPA Group ReKey Internal:

The period of renewal time for changing the security key automatically

between wireless client and Access Point (AP). This is in seconds.

RADIUS Server IP Address:

RADIUS( Remote Authentication Dial In User Service), Enter the

IP address of RADIUS authentication server.

RADIUS Server Port:

Enter the port number of RADIUS authentication server here.

RADIUS Key:

Enter the password of RADIUS authentication server.

WPA/WAPI Encryption:

There are two Algorithms, AES (Advanced Encryption Standard) and

Page 107 / 308

102

TKIP(Temporal Key Integrity Protocol) which help to protect the wireless communication.



Mixed WPA2/WPA-PSk

WPA/WAPI passphrase:

enter the WPA.WAPI passphrase, you can

click here to display

to view it.

WPA Group ReKey Internal:

The period of renewal time for changing the security key automatically

between wireless client and Access Point (AP). The unit is second.

WPA/WAPI Encryption:

There are two Algorithms, AES (Advanced Encryption Standard) and

TKIP(Temporal Key Integrity Protocol) which help to protect the wireless communication.

Page 108 / 308

103

WPS Setup

WPS (Wi-Fi Protected Setup) feature is a standard protocol created by Wi-Fi Alliance. WPS is used

to exchange the AP setting with Station and configure AP settings. This feature greatly simplifies the

steps needed to create a Wi-Fi network for a residential or an office setting. The commonly known

PIN method

is supported to configure WPS.

WPS:

Select enable to enable WPS function. Please note that WPS can only be available when

WPA2-PSK or OPEN mode is configured.

Note:

1) WPS feature is only available when in WPA2 or OPEN mode in security settings.

2) Here wireless can be configured as

Registrar

and

Enrollee

mode respectively. When AP is

configured as Registrar, you should select “Configured” in the WPS AP Mode below, and default

WPS AP Mode is “Configured”. When AP is configured as Enrollee, the WPS AP Mode below

should be changed to “Unconfigured”. Follow the following steps.

Page 109 / 308

104

Configure AP as Registrar

Add Enrollee with PIN method

1. Select radio button “

Enter STA PIN

”.

2. Input PIN from Enrollee Station (16837546 in this example), Or else users can

alternatively

enter the authorized station MAC

Help:

it is to help users to understand the concept and correct

operation.

3.

Click

.

(Station PIN)

(Station MAC)

Note:

Users can

alternatively

input PIN from Enrollee Station or enter the authorized station MAC.

Page 110 / 308

105

4. Operate Station to start WPS Adding Enrollee. Launch the wireless client’s WPS utility (eg.Ralink

Utility). Set the Config Mode as Enrollee, press the WPS button on the top bar, select the AP (eg.

Wlan-ap-2.4g) from the WPS AP List column. Then press the PIN button located on the middle

left of the page to run the scan.

Rate

Popular Billion Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share