Page 66 / 211
Scroll up to view Page 61 - 65
62
Ethernet mode
1.
Select
Ethernet,
press
Continue
to go on to next step, or if you only want to configure Wireless,
press
Jump to Wireless setting
.
2.
Enter the username, password from your ISP, for IP and DNS settings; also refer to your ISP.
Here IPv6 service is enabled by default.
3.
Wait while the device is configured.
4.
WAN port configuration is successful.
Page 67 / 211
63
5.
After the configuration is successful, click
Next to Wireless
button and you may proceed to
configure the Wireless setting. The device supports dual-band wireless connections, in Quick Start
part, users can only enable or disable the wireless on the band and the exact SSID and encryption
Key
(1. Leave it empty to disable the wireless security; 2. Fill in the Key, and the encryption mode
will be WPA2-PSK/AES).
For detail setting, please go to the Wireless part in this Manual.
6.
Continue to set 5GHz wireless.
Page 69 / 211
65
3G/LTE
1.
Select
3G/LTE,
press
Continue
to go on to next step, or if you only want to configure Wireless,
press
Jump to Wireless setting
.
2.
Select the 3G mode,
and enter the APN, username, password from your ISP; and check with your
ISP with the authentication method setting.
3.
Wait while the device is configured.
4.
WAN port configuration is successful.
Page 70 / 211
66
5.
After the configuration is successful, click
Next to Wireless
button and you may proceed to
configure the Wireless setting. The device supports dual-band wireless connections, in Quick Start
part, users can only enable or disable the wireless on the band and the exact SSID and encryption
Key
(1. Leave it empty to disable the wireless security; 2. Fill in the Key, and the encryption mode
will be WPA2-PSK/AES).
For detail setting, please go to the Wireless part in this Manual.
6.
Continue to set 5GHz wireless.
19216811.live