Page 61 / 211
Scroll up to view Page 56 - 60
57
Log
System Log
Display system logs accumulated up to the present time. You can trace historical information with
this function. And the log policy can be configured in
Configure Log
section.
Refresh:
Click to update the system log.
Clear:
Click to clear the current log from the screen
.
Page 62 / 211
58
Security Log
Security log displays the message logged about security, like filter messages and some firewall
message. You can turn to
IP Filtering Outgoing
,
IP Filtering Incoming
,
URL Filter
to determine if you
want to log this information. Also you can turn to Configure Log section below to determine the level
to log the message. You can use this to track potential threats to your system and network.
Refresh:
Click to update the system log.
Clear:
Click to clear the current log from the screen.
Page 63 / 211
59
Quick Start
Quick Start
This part allows you to quickly configure and connect your router to internet.
DSL mode
1.
Select DSL, press
Continue
to go on to next step.
2
.
Enter the username, password from your ISP, for IP and DNS settings; also refer to your ISP.
Here IPv6 service is enabled by default.
If the DLS line is not synchronized, the page will pop up warning of the DSL connection failure.
Page 64 / 211
60
3
. Wait while the device is configured.
4
.
WAN port configuration is successful.
5
. After the configuration is successful, click
Next to Wireless
button and you may proceed to
configure the Wireless setting. The 7800DXL supports dual-band wireless, here you can set to
activate wireless on which band or both and set the SSID and encryption Key
(1. Leave it empty to
disable the wireless security; 2. Fill in the Key, and the encryption mode will be WPA2-PSK/AES).
6
. Continue to set 5GHz wireless.
Page 65 / 211
61
7
. Success.
If Quick Start is finished, user can turn to Status > Summary to see the basic information.
19216811.live