42

Summary

The basic information about the device is provided here (the following is a configured

screenshots to let users understand clearly).

Device Information

Model Name:

Displays the model name.

Host Name:

Displays the name of the router.

System Up-Time:

Displays the elapsed time since the device is on.

Date/Time:

Displays the current exact date and time.

Software Version:

Firmware version.

LAN IPv4 Address:

Displays the LAN IPv4 address.

LAN IPv6 Address:

Displays the LAN IPv6 address. Default is a Link-Local address, but

when connects to ISP, it will display the Global Address, like above figure.

MAC Address:

Displays the MAC address.

DSL PHY and Driver Version:

Display DSL PHY and Driver version.

Wireless Driver Version:

Displays wireless driver version.

WAN

Line Rate – Upstream (Kbps):

Displays Upstream line Rate in Kbps.

Line Rate – Downstream (Kbps):

Displays Downstream line Rate in Kbps.

Default Gateway:

Displays Default Gateway.

Connection Time:

Displays the elapsed time since ADSL connection is up.

Primary DNS Server:

Displays IPV4 address of Primary DNS Server.

Secondary DNS Server:

Displays IPV4 address of Secondary DNS Server.

Default IPv6 Gateway:

Displays the IPv6 Gateway used.

43

WAN

This table displays the information of the WAN connections, users can turn here for WAN connection

information.

Interface:

The WAN connection interface.

Description:

The description of this connection.

Type:

The protocol used by this connection.

Status:

To disconnect or connect the link.

Connection Time:

The WAN connection time since WAN is up.

IPv4 Address:

The WAN IPv4 Address the device obtained.

IPv6 Address:

The WAN IPv6 Address the device obtained.

44

Statistics

LAN

The table shows the statistics of LAN.

Note:

P4 can be configured as EWAN, and when the device is in EWAN profile, there is no

P4/EWAN interface as P4 is working as a WAN port.

(DSL)

(EWAN)

Interface:

List each LAN interface. P1-P4 indicates the four LAN interfaces.

Bytes:

Display the Received and Transmitted traffic statistics in Bytes.

Packets:

Display the Received and Transmitted traffic statistics in Packets.

Errors:

Display the statistics of errors arising in Receiving or Transmitting data.

Drops:

Display the statistics of drops arising in Receiving or Transmitting data.

Reset:

Press this button to refresh the statistics.

45

WAN Service

The table shows the statistics of WAN.

Interface:

Display the connection interface.

Description:

the description for the connection.

Bytes:

Display the WAN Received and Transmitted traffic statistics in Bytes.

Packets:

Display the WAN Received and Transmitted traffic statistics in Packests.

Errors:

Display the statistics of errors arising in Receiving or Transmitting data.

Drops:

Display the statistics of drops arising in Receiving or Transmitting data.

Reset:

Press this button to refresh the statistics.

xTM

The Statistics-xTM screen displays all the xTM statistics

Port Number:

Shows number of the port for xTM.

In Octets:

Number of received octets over the interface.

Out Octets:

Number of transmitted octets over the interface.

In Packets:

Number of received packets over the interface.

Out Packets:

Number of transmitted packets over the interface.

In OAM Cells:

Number of OAM cells received.

Out OAM Cells:

Number of OAM cells transmitted.

In ASM Cells:

Number of ASM cells received.

Out ASM Cells:

Number of ASM cells transmitted.

In Packet Errors:

Number of received packets with errors.

In Cell Errors:

Number of received cells with errors.

Reset:

Click to reset the statistics.

46

xDSL

Mode:

Modulation protocol, including G.dmt, G.lite, T1.413, ADSL2, AnnexL, ADSL2+ and AnnexM.

Traffic Type:

transfer mode, here supports ATM and PTM.

Status:

Show the status of DSL link.

Link Power State:

Show link output power state.

Line Coding (Trellis):

Trellis on/off.

SNR Margin (0.1 dB):

show the Signal to Noise Ratio(SNR) margin.

Attenuation (0.1 dB):

This is estimate of average loop attenuation of signal.

Output Power (0.1 dBm):

show the output power.

Attainable Rate (Kbps) :

The sync rate you would obtain.

Rate (Kbps):

show the downstream and upstream rate in Kbps.