Page 6 / 24
Scroll up to view Page 1 - 5
6
Customer support
quick reference
Bell online service
bell.ca/service
Help with your services
My Internet
bell.ca/myinternet
Manage your Bell account online
Internet check up
bell.ca/internetcheckup
Automated troubleshooting tool
Internet security and service
bell.ca/securityandinternet
Protect yourself and computer while online
Service status
bell.ca/servicestatus
Online status updates
Service demonstration video
bell.ca/servicedemo
Live support
bell.ca/livesupport
Telephone support
Internet service assistance
310-SURF (310-7873)
FibeRG_0110_ENG_V3
6
05/02/10
10:34 AM
Page 7 / 24
7
Setting up your
wireless connection
Follow these instructions to setup your wireless connection. Before you
begin, ensure the Ethernet cable from the Bell Fibe modem is connected to
the Ethernet port on the back of the Wireless Access Point device.
Windows 7
-
Click on the wireless bar located at the right hand side of the system bar.
-
The list of available wireless networks appears with your network name.
Click
Refresh network list
if yours does not appear. This may take a few
minutes if you just plugged in the device.
-
Select your network name, and click
Connect
.
-
Type your 8-digit WPA2 key (see underside of Wireless Access Point
device) in the
Security key
box, click
OK
.
Windows Vista
-
Click
Start
, then
Connect to
.
-
Your network name will appear. If not, click the two arrows in the top
right corner. This may take a few minutes if you just plugged in the
device.
-
Type your 8-digit WPA2 key in the
Security key or Passphrase
text box.
-
Click
Connect
.
Windows XP
-
Click the
Wireless networks detected
message or double-click the icon in
your system.
-
Your network name will appear. Double click it. This may take a few
minutes if you just plugged in the device.
-
In the wireless network connection box, type in your 8-digit WPA2 key.
-
Click
Connect
.
FibeRG_0110_ENG_V3
7
05/02/10
10:34 AM
Page 8 / 24
8
continued
Mac 10.4 – 10.6
-
Click on the
Airport
icon.
-
Your network name will appear. If not, click the
Airport
icon again.
This may take a few minutes if you just plugged in the device.
-
Click on your network name in the list.
-
Type your 8-digit WPA2 key in the
Password
text box.
-
Click
OK
.
For more information on creating a Wireless Home Network,
visit
bell.ca/wirelessnetworking.
FibeRG_0110_ENG_V3
8
05/02/10
10:34 AM
Page 9 / 24
9
Modifying your wireless
settings
You can manually configure the settings on your Wireless Access Point (WAP)
device. Before you can access the WAP device, you must first determine
which IP address has been assigned. To identify what the IP address is:
1.
Open your web browser.
2.
Type
in the address bar, and then press
Enter
. If you are
prompted to enter in a username and password, these are set to the
following defaults:
Username
: admin
Password
: admin
3.
Select
Device Table
from the left menu. In this Device Table, note down the
IP address indicated for
WAP610N
. You will need this IP address to
continue.
4.
Close and then re-open your web browser.
5.
Type
where X is the last number in the IP address of the
WAP610N
device. Then press
Enter
. If you are prompted to enter in a
username and password, these are set to the following defaults:
Username
: admin
Password
: admin
FibeRG_0110_ENG_V3
9
05/02/10
10:34 AM
Page 10 / 24
10
The first screen that appears is
Basic Setup
and enables you to change the
WAP’s wired, Ethernet network settings.
FibeRG_0110_ENG_V3
10
05/02/10
10:34 AM
19216811.live