Page 86 / 112
Scroll up to view Page 81 - 85
84
Manually Configuring Network Settings
Manually Configuring Network Adapters in Mac OS X
1.
Click on the “System Preferences” icon.
2.
Select “Network”
(1)
from the “System Preferences” menu.
3.
Select “Built-in Ethernet”
(2)
next to “Show” in the
Network menu.
(1)
(2)
(3)
(4)
(5)
Page 87 / 112
85
section
2
1
3
4
5
6
7
8
9
10
Manually Configuring Network Settings
4.
Select the “TCP/IP” tab
(3)
. Next to “Configure:”
(4)
, you should
see “Manually” or “Using DHCP”. If you do not, check the
PPPoE tab
(5)
to make sure that “Connect using PPPoE” is NOT
selected. If it is, you will need to configure your Router for a
PPPoE connection type using your user name and password.
5.
If “Manually” is selected, your Router will need to be set up
for a static IP connection type. Write the address information
in the table below. You will need to enter this information into
the Router.
6.
If not already selected, select “Using DHCP” next to “Configure:”
(4)
, then click “Apply Now”.
Your network adapter(s) are now configured for use with the Router.
Page 88 / 112
86
Recommended Web Browser Settings
In most cases, you will not need to make any changes to your web
browser’s settings. If you are having trouble accessing the Internet or
the Web-Based Advanced User Interface, then change your browser’s
settings to the recommended settings in this section.
Internet Explorer 4.0 or Higher
1.
Start your web browser. Select “Tools” then “Internet Options”.
2.
In the “Internet Options” screen, there are three selections:
“Never dial a connection”, “Dial whenever a network connection
is not present”, and “Always dial my default connection”. If you
can make a selection, select “Never dial a connection”. If you
cannot make a selection, go to the next step.
3.
Under the “Internet Options” screen, click on “Connections” and
select “LAN Settings…”.
Page 89 / 112
Recommended Web Browser Settings
87
section
2
1
3
4
5
6
7
8
9
10
4.
Make sure there are no check marks next to any of the displayed
options: “Automatically detect settings”, “Use automatic
configuration script”, and “Use a proxy server”. Click “OK”. Then
click “OK” again in the “Internet Options” page.
Netscape
®
Navigator
®
4.0 or Higher
1.
Start Netscape. Click on “Edit” then “Preferences”.
2.
In the “Preferences” window, click on “Advanced” then select
“Proxies”. In the “Proxies” window, select “Direct connection to
the Internet”.
Page 90 / 112
88
Troubleshooting
Problem:
Installation CD does not automatically start.
Solution:
If the CD-ROM does not start the Easy Install Wizard automatically,
it could be that the computer is running other applications that are
interfering with the CD drive.
1.
If the Easy Install Wizard screen does not appear within 15—20
seconds, open up your CD-ROM drive by double-clicking on the
“My Computer” icon that is located on your desktop.
2.
Next, double-click on the CD-ROM drive that the Easy Install
Wizard Software CD has been placed in to start the installation.
3.
The Easy Install Wizard should start within a few seconds. If,
instead, a window appears showing the files on the CD,
double-click on the icon labeled “EasyInstall.exe”.
4.
If the Easy Install Wizard still does not start, reference the section
titled “Manually Configuring Network Settings” (page 80 of this
User Manual) for an alternate setup method.
19216811.live