1. Home
    2. /
  2. Manuals
    3. /
  3. Belkin
    4. /
  4. F5D9230-4v5
    5. /
  5. 21
Page 101 / 120 Scroll up to view Page 96 - 100
97
Recommended Web Browser Settings
section
1
9
2
3
4
5
6
7
8
10
2.
In the “Internet Options” screen, there are three selections: “Never
dial a connection”, “Dial whenever a network connection is not
present”, and “Always dial my default connection”. If you can make
a selection, select “Never dial a connection”. If you cannot make a
selection, go to the next step.
3.
Under the “Internet Options” screen, click on “Connections” and
select “LAN Settings...”.
Page 102 / 120
98
Recommended Web Browser Settings
4.
Make sure there are no check marks next to any of the displayed options:
“Automatically detect settings”, “Use automatic configuration script”, and
“Use a proxy server”. Click “OK”. Then click “OK” again in the “Internet
Options” page.
Page 103 / 120
99
Recommended Web Browser Settings
section
1
9
2
3
4
5
6
7
8
10
Netscape
®
Navigator
®
4.0 or Higher
1.
Start Netscape. Click on “Edit” then “Preferences”.
2.
In the “Preferences” window, click on “Advanced” then select
“Proxies”. In the “Proxies” window, select “Direct connection to
the Internet”.
Page 104 / 120
100
Troubleshooting
Problem:
Installation CD does not automatically start.
Solution:
If the CD-ROM does not start the Setup Assistant automatically, it could be that the
computer is running other applications that are interfering with the CD drive.
1.
If the Setup Assistant screen does not appear within 15-20 seconds, open
up your CD-ROM drive by double-clicking on the “My Computer” icon that is
located on your desktop.
2.
Next, double-click on the CD-ROM drive that the Setup Assistant CD has been
placed in to start the installation.
3.
The Setup Assistant should start within a few seconds. If, instead, a window
appears showing the files on the CD, double-click on the icon labeled
“EasyInstall.exe”.
4.
If the Setup Assistant still does not start, reference the section titled “Manually
Configuring Network Settings” (page 88 of this User Manual) for an alternative
setup method).
Page 105 / 120
101
Troubleshooting
section
1
9
2
3
4
5
6
7
8
10
Problem:
Setup Assistant cannot find my Router.
Solution:
If the Setup Assistant is not able to find the Router during the installation
process, please check the following items:
1.
If the Setup Assistant is not able to find the Router during the installation
process, there may be third-party firewall software installed on the
computer attempting to access the Internet. Examples of third-party
firewall software are ZoneAlarm, BlackICE PC Protection, McAfee
Personal Firewall, and Norton Personal Firewall. If you do have firewall
software installed on your computer, please make sure that you properly
configure it. You can determine if the firewall software is preventing
Internet access by temporarily turning it off. If, while the firewall is
disabled, Internet access works properly, you will need to change the
firewall settings to function properly when it is turned on. Please refer to
the instructions provided by the publisher of your firewall software for
instructions on configuring the firewall to allow Internet access.
2.
Unplug power to the Router for 10 seconds, and then plug the power
back into the Router. Ensure that the Router’s Power light is on; it
should be solid green. If not, check to make sure that the AC adapter is
connected to the Router and plugged into a wall outlet.
3.
Ensure that you have a cable (use the cable included with the Router)
connected between (1) the network (Ethernet) port on the back of the
computer and (2) one of the LAN ports, labeled “1” through “4”, on the
back of the Router.
Note:
The computer should NOT be connected to the port labeled “Internet/
WAN” on the back of the Router.
4.
Try shutting down and restarting your computer, then rerunning the
Setup Assistant.
If the Setup Assistant is still unable to find the Router, reference the section
titled “Manually Configuring Network Settings” for installation steps.
Problem:
Setup Assistant cannot connect my Router to the Internet.
Solution:
If the Setup Assistant is not able to connect the Router to the Internet,
please check the following items:
1.
Use the troubleshooting suggestions within the Setup Assistant. If the
6

Rate

3.5 / 5 based on 2 votes.

Popular Belkin Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top