1. Home
    2. /
  2. Manuals
    3. /
  3. Belkin
    4. /
  4. F5D9230-4v5
    5. /
  5. 19
Page 91 / 120 Scroll up to view Page 86 - 90
87
Using the Web-Based Advanced User Interface
section
1
9
2
3
4
5
6
7
8
10
Enabling/Disabling UPnP
UPnP (Universal Plug-and-Play) is yet another advanced feature offered by
your Belkin Router. It is a technology that offers seamless operation of voice
messaging, video messaging, games, and other applications that are UPnP-
compliant. Some applications require the Router’s firewall to be configured
in a specific way to operate properly. This usually requires opening TCP and
UDP ports, and in some instances, setting trigger ports. An application that
is UPnP-compliant has the ability to communicate with the Router, basically
“telling” the Router which way it needs the firewall configured. The Router
ships with the UPnP feature disabled. If you are using any applications that
are UPnP-compliant, and wish to take advantage of the UPnP features, you
can enable the UPnP feature. Simply select “Enable” in the “UPnP Enabling”
section of the “Utilities” page. Click “Apply Changes” to save the change.
Enabling/Disabling Auto Firmware Update
This innovation provides the Router with the built-in capability to automatically
check for a new version of firmware and alert you that the new firmware is
available. When you log into the Router’s advanced interface, the Router will
perform a check to see if new firmware is available. If so, you will be notified.
You can choose to download the new version or ignore it.
Page 92 / 120
88
Manually Configuring Network Settings
Set up the computer that is connected to the cable or DSL modem FIRST using these
steps. You can also use these steps to add computers to your Router after the Router
has been set up to connect to the Internet.
Manually Configuring Network Settings in Mac OS up to 9.x
1.
Pull down the Apple menu. Select “Control Panels” and
select “TCP/IP”.
2.
You will see the TCP/IP control panel. Select “Ethernet Built-In” or
“Ethernet” in the “Connect via:” drop-down menu
(1)
.
)
)
3.
Next to “Configure”
(2)
, if “Manually” is selected, your Router will need to be
set up for a static IP connection type. Write the address information in the
table below. You will need to enter this information into the Router.
Page 93 / 120
1
2
3
4
5
6
9
8
10
89
Manually Configuring Network Settings
section
7
4.
If not already set, at “Configure:”, choose “Using DHCP Server”. This
will tell the computer to obtain an IP address from the Router.
5.
Close the window. If you made any changes, the following window
will appear. Click “Save”.
Restart the computer. When the computer restarts, your
network settings are now configured for use with the Router.
Page 94 / 120
90
Manually Configuring Network Settings
Manually Configuring Network Settings in Mac OS X
1.
Click on the “System Preferences” icon.
2.
Select “Network”
(1)
from the “System Preferences” menu.
(1)
3.
Select “Built-in Ethernet”
(2)
next to “Show” in the Network menu.
(2)
(3)
(5)
(4)
Page 95 / 120
91
Manually Configuring Network Settings
section
1
9
2
3
4
5
6
7
8
10
4.
Select the “TCP/IP” tab
(3)
. Next to “Configure”
(4)
, you should see
“Manually” or “Using DHCP”. If you do not, check the PPPoE tab
(5)
to make sure that “Connect using PPPoE” is NOT selected. If it is,
you will need to configure your Router for a PPPoE connection type
using your user name and password.
5.
If “Manually” is selected, your Router will need to be set up for a
static IP connection type. Write the address information in the table
below. You will need to enter this information into the Router.
6.
If not already selected, select
“Using DHCP” next to “Configure”
(4)
,
then click “Apply Now”.
Your network settings are now configured for use with the Router.

Rate

3.5 / 5 based on 2 votes.

Popular Belkin Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top