1. Home
    2. /
  2. Manuals
    3. /
  3. Belkin
    4. /
  4. F5D7231-4v5
    5. /
  5. 20
Page 96 / 133 Scroll up to view Page 91 - 95
94
Manually Configuring Computer Network Settings
4.
Select the “TCP/IP” tab
(3)
. Next to “Configure”
(4)
, you should
see “Manually” or “Using DHCP”. If you do not, check the
PPPoE tab
(5)
to make sure that “Connect using PPPoE” is NOT
selected. If it is, you will need to configure your Router for a
PPPoE connection type using your user name and password.
5.
If “Manually” is selected, your Router will need to be set up
for a static IP connection type. Write the address information
in the table below. You will need to enter this information into
the Router.
6.
If not already selected, select “Using DHCP” next to “Configure”
(4)
, then click “Apply Now”.
Your network adapter(s) are now configured for use with the Router.
Downloaded from
www.Manualslib.com
manuals search engine
Page 97 / 133
Recommended Web Browser Settings
95
section
2
1
3
4
5
6
7
8
9
10
11
12
In most cases, you will not need to make any changes to your web
browser’s settings. If you are having trouble accessing the Internet or
the advanced web-based user interface, then change your browser’s
settings to the recommended settings in this section.
Internet Explorer 4.0 or Higher
1.
Start your web browser. Select “Tools” then “Internet Options”.
2.
In the “Internet Options” screen, there are three selections:
“Never dial a connection”, “Dial whenever a network connection
is not present”, and “Always dial my default connection”. If you
can make a selection, select “Never dial a connection”. If you
cannot make a selection, go to the next step.
3.
Under the “Internet Options” screen, click on “Connections” and
select “LAN Settings…”.
Downloaded from
www.Manualslib.com
manuals search engine
Page 98 / 133
96
Recommended Web Browser Settings
4.
Make sure there are no check marks next to any of the displayed
options: “Automatically detect settings”, “Use automatic
configuration script”, and “Use a proxy server”. Click “OK”. Then
click “OK” again in the “Internet Options” page.
Netscape Navigator 4.0 or Higher
1.
Start Netscape. Click on “Edit” then “Preferences”.
2.
In the “Preferences” window, click on “Advanced” then select
“Proxies”. In the “Proxies” window, select “Direct connection to
the Internet”.
Downloaded from
www.Manualslib.com
manuals search engine
Page 99 / 133
Using your Router with AOL Broadband
97
section
2
1
3
4
5
6
7
8
9
10
11
12
How to set up your network to operate with AOL
®
for Broadband
and your new Belkin Router
There are two types of AOL connections available—either AOL DSL
or AOL Cable. A third service is called AOL BYOA (Bring Your Own
Access). This is used along with an existing broadband connection,
supplied by your Internet Service Provider (ISP). If you have AOL
DSL, please refer to “Directions for AOL DSL Users” below for setup
instructions. If you have either AOL Cable or the AOL BYOA service,
please go to the “Directions for AOL Cable Users” section of this
guide, on page 104.
Directions for AOL DSL Users
STEP 1:
Create AOL screen names for the Router and for each
computer that will be using your AOL service.
STEP 2:
Configure the Router for AOL for Broadband.
STEP 3:
Configure your computers with the new AOL screen names
you just created.
Step 1
Creating new AOL screen names
Note:
Your AOL connections must be set to operate on the TCP/IP
standard. If you have designated another protocol, reset them to
TCP/IP before proceeding.
1.
If your Router is currently connected to the network, remove
it from the network and connect it directly to your broadband
modem. Then, log on to AOL as you normally do.
2.
Log on to your AOL master account.
Downloaded from
www.Manualslib.com
manuals search engine
Page 100 / 133
98
Using your Router with AOL Broadband
3.
Perform a keyword
search on “names” by
clicking “Keyword”, and
then “Go to Keyword”.
4.
In the “Keyword”
window, type in
“names” then
click “Go”.
5.
You will see the
“AOL Screen Names”
window. Click “CREATE
a Screen Name”.
6.
A window will appear
that asks whether
the screen name is
for a child. If you are
creating the screen
name for the Router,
click “Yes” or “No” (it
doesn’t matter which
you select). If you
are creating a screen
name for an additional
computer, select the
appropriate answer.
Downloaded from
www.Manualslib.com
manuals search engine

Rate

4.5 / 5 based on 2 votes.

Popular Belkin Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top