Page 71 / 90
Scroll up to view Page 66 - 70
User Manual
Page 71
of 90
Routing
Static Routing
If the ADSL Router is connected to more than one network, you may need to set up a
static route between them. A static route is a pre-defined pathway that network
information must travel to reach a specific host or network. You can use static routing to
allow different IP domain users to access the Internet through the ADSL Router.
Static Routing
Static Routing
Static Routing
Static Routing
The New Destination IP is the address of the remote LAN network or host to which you
want to assign a static route. Enter the IP address of the host for which you wish to
create a static route here. For a standard Class C IP domain, the network address is the
first three fields of the New Destination IP, while the last field should be 0. The Subnet
Mask identifies which portion of an IP address is the network portion, and which portion
is the host portion. For a full Class C Subnet, the Subnet Mask is 255.255.255.0. The
Gateway IP address should be the IP address of the gateway device that allows for
contact between the Gateway and the remote network or host
Page 72 / 90
User Manual
Page 72
of 90
Routing Table
Routing Table displays the information used by routers when making packet forwarding
decisions. Packets are routed according to the packet's destination IP address.
Routing Table
Routing Table
Routing Table
Routing Table
Page 73 / 90
User Manual
Page 73
of 90
System Password
Anyone who can access the web interface can be considered an Administrator. To restrict
access to the web interface, you need to set the System Password.
To change the System Password:
1. Select Advanced Menu
Advanced Menu
Advanced Menu
Advanced Menu
2.
Click System Password
System Password
System Password
System Password. This opens the System Password
System Password
System Password
System Password page.
3. Select Enable Authentication
Enable Authentication
Enable Authentication
Enable Authentication.
4. Enter your password.
5.
Reenter your password in the Confirm Password
Confirm Password
Confirm Password
Confirm Password text box.
6. To temporarily implement the settings, click Apply
Apply
Apply
Apply.
7. To make changes permanent, click Save Settings
Save Settings
Save Settings
Save Settings.
Note:
Note:
Note:
Note:
Remember your account information. If you forget the User Name and System Password, you
will need to reset the router to its default settings. To reset, press RESET
RESET
RESET
RESET at the router’s back
panel for 10 seconds.
To change the timeout settings:
1. Select Advanced Menu
Advanced Menu
Advanced Menu
Advanced Menu
2. Click System Password
System Password
System Password
System Password.
3. Select Enable Authentication
Enable Authentication
Enable Authentication
Enable Authentication.
4.
Enter the number of minutes in the Idle Timeout
Idle Timeout
Idle Timeout
Idle Timeout text field.
5. To temporarily implement the settings, click Apply
Apply
Apply
Apply.
6. To make changes permanent, click Save Settings
Save Settings
Save Settings
Save Settings.
Page 74 / 90
User Manual
Page 74
of 90
Firmware Update
When updating the firmware, make sure you are using the correct file. Once the upgrade
is complete the router will reboot. You will need to log back into the router after the
firmware upgrade is completed.
To update the firmware:
1.
Select
the
Advanced
Menu
Advanced
Menu
Advanced
Menu
Advanced Menu and then click Firmware Upgrade
Firmware Upgrade
Firmware Upgrade
Firmware Upgrade. This opens the
Firmware Upgrade
Firmware Upgrade
Firmware Upgrade
Firmware Upgrade page.
2. Click Browse
Browse
Browse
Browse and then locate the firmware file.
3. Click Update Gateway
Update Gateway
Update Gateway
Update Gateway. The update may take a few minutes. Make sure that the
power is not turned off during the update process.
Restore to Default
To reset to the default factory settings, press RESET
RESET
RESET
RESET for 10 seconds. This can be found at
the router’s back panel. When you reset, all the firmware updates will be lost.
To access the web interface again, you need to install the router anew.
Page 75 / 90
User Manual
Page 75
of 90
Security Menu
Security Menu allows you to configure security tools like IP Filters and LAN Isolation.
Security Menu
Security Menu
Security Menu
Security Menu
19216811.live