Aztech DSL7000GRV-S Router Manual PDF (Setup & Configuration Guide)

Page 51 / 90 Scroll up to view Page 46 - 50

User Manual

Page 51

of 90

°

User Name

°

Password

°

Domain Name

4.

Click Apply

Apply

Apply to temporarily apply the settings.

5. To make changes permanent, click Save Settings

Settings

Settings.

Port Forwarding

Port forwarding (or virtual server) allows you to direct incoming traffic to specific LAN

hosts based on a protocol port number and protocol. Using the Port Forwarding page, you

can provide local services (for example, web hosting) for people on the Internet or play

Internet games. Port forwarding is configurable per LAN group.

Port Forwarding

A database of predefined port forwarding rules allows you to apply one or more rules to

one or more members of a defined LAN group. You can view the rules associated with a

predefined category and add the available rules for a given category. You can also

create, edit, or delete your own port forwarding rules.

Page 52 / 90

User Manual

Page 52

of 90

To configure port forwarding:

1. Select Advanced

Advanced

Advanced.

2.

Select Application > Port

Application > Port

Application > Port Forwarding

Forwarding

Forwarding.

3. Select WAN Connection

WAN Connection

WAN Connection, LAN Group

LAN Group

LAN Group, and LAN IP

LAN IP

LAN IP. If the desired LAN IP is not

available

in

the

LAN IP

drop-down

menu,

you

can

add

it

using

the

LAN Client

page

page, which is accessed by clicking New IP

New IP

New IP.

4. Select the available rules for a given category and click Add

Add

Add to apply the rule for

this category. If a rule is not in the list, you can create your own rule in the User

User

category. Select User

User

User, and then click New

New

New.

5. The Rule Management page opens for you to create new rules. Enter Rule Name

Rule Name

Rule Name,

Protocol

Protocol, Port

Port

Port Start

Start

Start, Port End

Port End

Port End, and Port Map

Port Map

Port Map, and then click Apply

Apply

Apply.

6. Continue to add rules as they apply from each category.

7.

Click Apply

Apply

Apply to temporarily activate the settings.

8. To make changes permanent, click Save Settings

Save Settings

Save Settings.

Page 53 / 90

User Manual

Page 53

of 90

DMZ Settings

Setting a host on your local network as demilitarized zone (DMZ) forwards any network

traffic that is not redirected to another host via the Port Forwarding feature to the IP

address of the host. This opens the access to the DMZ host from the Internet. This

function is disabled by default. By enabling DMZ, you add an extra layer of security

protection for hosts behind the firewall.

To enable DMZ Settings:

1.

On

the

Port

Forwarding

Port

Forwarding

Port

Forwarding

Port Forwarding page, select Enable DMZ

Enable DMZ

Enable DMZ. This opens the DMZ Settings

page.

2.

Select the WAN Connection

WAN Connection

WAN Connection, LAN Group

LAN Group

LAN Group, and LAN IP Addres

LAN IP Addres

LAN IP Address.

3.

Click Apply

Apply

Apply to temporarily apply the settings.

4. To make changes permanent, click Save Settings

Save Settings

Save Settings.

Custom Port Forwarding

The Custom Port Forwarding page allows you to create up to 15 custom Port Forwarding

entries to support specific services or applications, such as concurrent NAT/NAPT

operation.

Page 54 / 90

User Manual

Page 54

of 90

Bridge Filters

The Bridge Filters allows you to enable, add, edit, or delete the filter rules. When bridge

filtering is enabled, each frame is examined against every defined filter rule in sequence.

When a match is found, the appropriate filtering action (allow or deny) is performed. Up

to 20 filter rules are supported with bridge filtering.

Bridge Filters

To configure Bridge Filters:

1. Select Advanced

Advanced

Advanced.

2.

Select Application > Bridge Filters

Application > Bridge Filters

Application > Bridge Filters. This opens the Bridge Filters page.

3. Select Enable Bridge Filters

Enable Bridge Filters

Enable Bridge Filters.

4. To add a rule, enter the source MAC address

MAC address

MAC address, Destination MAC addresses

Destination MAC addresses

Destination MAC addresses, and

Protocol

Protocol with desired filtering type, then click Add

Add

Add.

Note:

You can also edit a rule that you created using the Edit

Edit

Edit checkbox. You can delete using Delete

Delete

Delete.

5.

Click Apply

Apply

Apply to temporarily activate the settings.

6. To make changes permanent, click Save Settings

Save Settings

Save Settings.

Page 55 / 90

User Manual

Page 55

of 90

Web Access Control

The Web Access Control page allows you to access the router via the web from a remote

location like your home or office.

Web Access Control

To configure Web Access:

1. Select Advanced Menu

Advanced Menu

Advanced Menu.

2.

Select Application > Web Access Control

Application > Web Access Control

Application > Web Access Control.

3. Select Enable

Enable

Enable.

4.

Select the connection used to connect to the Internet in the Choose a connection

Choose a connection

Choose a connection.

5. Configure the following fields:

°

Remote Host IP

°

Remote Netmask

°

Redirect Port

6.

Click Apply

Apply

Apply to temporarily activate the settings on the page. The WAN address is

now added into the IP Access List. This allows you to access you router remotely.

7. To make changes permanent, click Save Settings

Save Settings

Save Settings.

Rate

Popular Aztech Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share