Page 31 / 90
Scroll up to view Page 26 - 30
User Manual
Page 31
of 90
DHCP Connection
DHCP allows the router to automatically obtain the IP address from the server. This option
is commonly used in when the IP is dynamically assigned and is not known prior to
assignment.
New DHCP Connection Setup
New DHCP Connection Setup
New DHCP Connection Setup
New DHCP Connection Setup
Page 32 / 90
User Manual
Page 32
of 90
Bridged Connection Setup
A pure bridged connection does not assign any IP address to the WAN interface. NAT and
firewall rules are not enabled. This connection method makes the router act as a bridge
for passing packets between the WAN interface and the LAN interface.
New Bridge Connection Setup
New Bridge Connection Setup
New Bridge Connection Setup
New Bridge Connection Setup
Page 33 / 90
User Manual
Page 33
of 90
ADSL Modulation
ADSL Modulation allows you to select any combination of DSL training modes. Leave the
default value if you are unsure or the service provider did not provide this information. In
most cases, this screen should not be modified.
ADSL Modulation
ADSL Modulation
ADSL Modulation
ADSL Modulation
Page 34 / 90
User Manual
Page 34
of 90
Connection Scan
This feature helps users to detect the PVC settings provided by the service provider.
Before the router can begin scanning the connection, the telephone line has to be
plugged into the router.
Connection Scan
Connection Scan
Connection Scan
Connection Scan
To perform connections scan:
1. Select the Advanced Menu
Advanced Menu
Advanced Menu
Advanced Menu.
2.
Select WAN > Connection Scan
WAN > Connection Scan
WAN > Connection Scan
WAN > Connection Scan.
3. Click Scan
Scan
Scan
Scan.
Page 35 / 90
User Manual
Page 35
of 90
LAN
The router is preconfigured to automatically provide IP addresses to all the computers in
the Local Area Network (LAN). Your router allows you to create and configure LAN
groups.
LAN Configuration
The router can support up to two LAN groups through different physical interfaces. These
interfaces include:
°
Ethernet
°
USB
You can use other LAN interfaces to a group except for the Ethernet interface, which is
assigned to LAN group 1. Each LAN group can then be configured with static IP address,
dynamic IP address, or be unmanaged (no IP).
LAN Configuration
LAN Configuration
LAN Configuration
LAN Configuration
19216811.live