User Manual

Page 81

of 90

System Log

System Log displays the router log. Depending on the severity level, the information log

will generate log reports to a remote host if remote logging is enabled.

System Log

System Log

System Log

System Log

To view the System Log, select the Status Menu

Status Menu

Status Menu

Status Menu and then click System Log

System Log

System Log

System Log.

User Manual

Page 82

of 90

Remote Log

Remote Log allows you to forward all logged information to one (or more) remote

computer. The type of information forwarded to the remote computer depends on the

Log level. Each log message belongs to a certain log level, which indicates the severity of

the event.

When you configure remote logging, you must specify a severity level. Log messages

that are rated at that level or higher are sent to the log server and can be viewed using

the server log application, which can be downloaded from the web.

Remote Log Settings

Remote Log Settings

Remote Log Settings

Remote Log Settings

To enable remote logging:

1.

Select the Status Menu

Status Menu

Status Menu

Status Menu and then click Remote Log

Remote Log

Remote Log

Remote Log.

2.

Select a Log Level

Log Level

Log Level

Log Level. There are 8 log levels listed below in order of severity.

°

Panic

Panic

Panic

Panic System panic or other condition that causes the router to stop

functioning.

°

Alert

Alert

Alert

Alert Conditions that require immediate correction, such as a corrupted system

database.

°

Critical

Critical

Critical

Critical Critical conditions such as hard drive errors.

User Manual

Page 83

of 90

°

Error

Error

Error

Error Error conditions that generally have less serious consequences than

errors in the emergency, alert, and critical levels.

°

Warning

Warning

Warning

Warning Conditions that warrant monitoring.

°

Notice

Notice

Notice

Notice (Default) Conditions that are not errors but might warrant special

handling.

°

Info

Info

Info

Info Events or non-error conditions of interest.

°

Deb

Deb

Deb

Debug

ug

ug

ug Software debugging message. Specify this level only when directed by

a technical support representative.

3.

Enter the IP Address

IP Address

IP Address

IP Address where the log will be sent to and then click Add

Add

Add

Add.

4.

Click Apply

Apply

Apply

Apply. The IP address will appear in the Select a logging destination

Select a logging destination

Select a logging destination

Select a logging destination drop-

down menu.

5. To make changes permanent, click Save Settings

Save Settings

Save Settings

Save Settings.

Note:

Note:

Note:

Note:

When you select a log level, all log information within this severity level and levels above

(meaning, more severe levels) will be sent to the remote host.

To disable a remote log:

1.

Select the IP address to be deleted from the Select a logging destination

Select a logging destination

Select a logging destination

Select a logging destination drop-

down menu.

2. To temporarily implement the changes, click Apply

Apply

Apply

Apply.

3. To make changes permanent, click Save Settings

Save Settings

Save Settings

Save Settings.

User Manual

Page 84

of 90

Network Statistics

The Ethernet, USB, and DSL line statuses are displayed in this page.

Network Statistics

Network Statistics

Network Statistics

Network Statistics – Ethernet

Ethernet

Ethernet

Ethernet

Network Statistics

Network Statistics

Network Statistics

Network Statistics – USB

USB

USB

USB

User Manual

Page 85

of 90

Network Statistics

Network Statistics

Network Statistics

Network Statistics - DSL

DSL

DSL

DSL

To view the Network Statistics, select the Status Menu

Status Menu

Status Menu

Status Menu and then click Network Statistics

Network Statistics

Network Statistics

Network Statistics.

DDNS Update Status

DDNS Update Status displays the WAN connection status. By default, DDNS is disabled.

When the DDNS is enabled, the DDNS client updates every time the router gets a new IP

address.

DDNS Update Status

DDNS Update Status

DDNS Update Status

DDNS Update Status

To view the DDNS Update Status, select the Status Menu

Status Menu

Status Menu

Status Menu and then click

DDNS Update

DDNS Update

DDNS Update

DDNS Update

Status

Status

Status

Status.