1. Home
    2. /
  2. Manuals
    3. /
  3. Axesstel
    4. /
  4. MV410r
    5. /
  5. 8
Page 36 / 58 Scroll up to view Page 31 - 35
35
A. Profile List
This window contains all the USB connection profiles previously defined
in the computer currently in use to connect with the Modem and
indicates which profile is active. Note that this list is stored in the
computer and not in the Modem, hence any changes you make in the
profiles are only stored locally. If you have more than one PC and intent
to use the USB connection with the Modem (not simultaneously) you
will need to make the same changes in each PC.
B. Add/Delete/Edit Profile
These buttons allows you to manage all USB connection profiles
previously defined in the computer.
To add a new profile, simply click the "Add" button. A secondary pop up
window will appear and ask you to enter all parameters associated with
the new connection. These parameters are:
•
Profile Name
•
User Id
•
Password
•
Dialed Number
Since these parameters are sent over the air to the network serving
your Modem, we advise you to contact your Service Provider before
Page 37 / 58
36
attempting this step.
To delete an existing profile, first highlight it by clicking the profile name
in the list then hit the "Delete" button.
To modify some settings of an existing profile, highlight it in the profile
list then click the "Edit" button. A secondary pop up window similar to
the "Add" pop up window will appear. This window is populated with
existing parameter values. You simply change the appropriate
parameter as needed. Again, we advise you to contact your Service
Provider before attempting this step.
5. RUIM Tab (MV400R-series only)
This tab lets you modify the setting of your Modem RUIM validation. You can
choose to permanently unlock your device so that future access will not require
PIN entering (hence no need to go through AxessManager). You may want to
do this if your device is shared with other users.
Also this tab allows you to modify your current PIN.
Page 38 / 58
37
Web Manager User Interface
The Web Manager User Interface is a web-based tool that you can use to set up
the Modem if you don’t want to use the default setting of Install CD. You can also
use it to manage advanced functions of the Modem. From the User Interface, you
can perform the following tasks:
•
View the Modem’s current settings and status
•
Configure the Modem's router function to connect to your Service
Provider with the settings that they provided you
•
Change the current network settings such as the Internal IP address, the
IP address pool, DHCP settings, and more
•
Set the Modem’s firewall to work with specific applications (port
forwarding)
•
Set up security features such as client restrictions, MAC address filtering,
WEP, and WPA
•
Enable the DMZ feature for a single computer on your network
•
Change the Modem’s internal password
•
Reboot the Modem
•
Back up your configuration settings
•
Reset the Modem’s default settings
•
Update the Modem’s firmware
Before you use the Advanced User Interface, you will need to have a
User Name
and
Password
of the Modem. Please contact your Service Provider to obtain
them.
Step 1
│
Access Network Setup
1.1.
Connect the PC to your Modem using the CAT-5 Ethernet cable. Use ANY
one of the Ethernet ports on your Modem.
1.2
If you have installed AxessManager, start AxessManager utility if it is not
already active. From Main window, select Menu button. Refer to
AxessManager Operational Guide for instructions if needed. If you have not
installed AxessManager, refer to section “Configuring Ethernet Access” to
Page 39 / 58
38
advance to step 2. Skip the rest of step 1.
1.3
From Menu window, select "Network" tab. A secondary pop up window will
appear and ask you to enter User Name and Password.
1.4
Enter the User Name and Password then click "OK". The pop up window
will change to a web-based window
Step 2
│
Navigate web-based UI
2.1
The Basic Setting page is the first page you will see when you access the
web based Advanced User Interface (UI). The basic setting page shows you
a quick view of the Modem’s login setting. All advanced setup pages can be
reached from this page.
Page 40 / 58
39
1. Quick Navigation Links
You can go directly to any of the Modem’s UI pages by clicking directly
on these links. The links are divided into logical categories and grouped
by tabs to make finding a particular setting easier to find.
2. Page Name
The page you are on can be identified by this name. This User Manual
will sometimes refer to pages by name. For instance “Advanced > LAN
IP Setup” refers to the “LAN IP Setup” page.
Basic Settings
Clicking on the header of the “Basic Settings” tab will take you to the “Basic
Settings” header page. From this page, the Modem’s basic settings can be
modified. These settings include:
¾
WAN Connection. A drop down menu allows users to change the
providers. The default value is EV-DO
¾
MAC Address
¾
PPP Login ID and password (if applicable)
¾
Authentication Method. A drop down menu allows users to change the
authentication method. The default value is PAP
¾
Dial No

Rate

4.5 / 5 based on 2 votes.

Popular Axesstel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top