Page 11 / 26
Scroll up to view Page 6 - 10
CDMA 1xEV-DO Wireless Broadband Modem
AXW-D800 / AXW-D1900
- 11 -
Connecting the World Now
Configuring Ethernet Connection
EV-DO modem provides an embedded Web-based Management Utility.
Configure your EV-DO modem by using your Web Browser. Please refer
to Web-based Manager section.
Log In
Open your Web browser and enter
192.168.0.1 in the address bar
When prompt for User name and password, enter the following user id
and password.
User ID:
admin
Password:
admin
If you have changed the user name and the password, enter the new
name and password.
Page 12 / 26
CDMA 1xEV-DO Wireless Broadband Modem
AXW-D800 / AXW-D1900
- 12 -
Connecting the World Now
1. Click on the “Network” tab.
2. Under “Local Area Network Setup”, Select “DHCP Server->Enable” to
enable Dynamic IP assignments.
3. Under “PPP Configuration”, enter login User ID and Password of the
account. Choose type of Authentication process used by the network.
Enter access dial number of login account.
4. Press “APPLY” button.
5. Turn off and turn on the terminal.
6. Log in and check if the information you have entered
are correctly
shown.
Password is shown with black dotsfor security purpose.
If the
User ID is not changed, repeat the steps 3, and 5..
DHCP stands for Dynamic Host Configuration Protocol. Axesstel Wireless
1x-EV-DO Modem has a built-in DHCP server. The DHCP server will
automatically assign an IP address to the computers on the LAN. Be sure
to set each client PC’s TCP/IP settings to “obtain an IP address
automatically”.
Page 13 / 26
CDMA 1xEV-DO Wireless Broadband Modem
AXW-D800 / AXW-D1900
- 13 -
Connecting the World Now
Connection using USB port
USB Driver Installation (Part 1)
Run Setup from the CD
Run the Setup program on the USB Driver CD.
It is important that you should run the setup before connecting the USB
cables to your PC.
1. Run the setup.
Make sure that
the USB cable is not
yet
connected.
z
If you wish to change the
location of the files, press
“Browse” and select location.
2. Otherwise, press “Next”.
Page 14 / 26
CDMA 1xEV-DO Wireless Broadband Modem
AXW-D800 / AXW-D1900
- 14 -
Connecting the World Now
z
If you wish to change the
START Menu location, change
the name of the folder.
3. Otherwise, press “Next”
z
If you do not wish to restart the
window, but restart later, check
“No, I will restart my computer
later.”
4. Otherwise, press Finish.
USB Driver Installation (Part 2)
Preparation
1. Turn off both the EV-DO modem and your PC.
2. Connect the included USB Cable to USB port on your PC.
3. Cable select switch, located between Ethernet and USB connectors,
should be set to USB.
4. Connect other end of USB Cable to USB port on EV-DO modem.
5. Connect the included Power Adapter to Power connector of EV-DO
modem.
6. Connect the other end of Power Adapter to an electrical outlet.
7. Power on EV-DO modem.
Page 15 / 26
CDMA 1xEV-DO Wireless Broadband Modem
AXW-D800 / AXW-D1900
- 15 -
Connecting the World Now
USB Driver Installation (Part 3)
Driver Installation
1.
Power on the PC. After the
boot up process, you will see
“Found New Hardware”
screen.
2. The New Hardware Wizard
may recognize the name by
itself.
Or you may have to
select from a list.
3. Select “Qualcomm
Multimedia USB Modem”.
4. When you encounter this
window, press “Continue
Anyway”.
19216811.live