1. Home
    2. /
  2. Manuals
    3. /
  3. AT&T
    4. /
  4. Home Base
    5. /
  5. 6
Page 26 / 33 Scroll up to view Page 21 - 25
Firewall - MAC/IP/Port Filtering
(continued)
Custom Applications:
This feature allows you to define your own applications.
Once defined, these applications can be enabled and disabled the same way as
pre-defined applications. To define an application, you need to know the ports and
protocol (TCP, UDP) used by the application for outgoing traffic. To start, click the
Add Custom Application
 button, then provide the following data:
MAC Address:
A network identifier unique to each device’s hardware.
Destination IP Address:
The internal IP address where traffic will be
filtered to.
Source IP Address:
The source IP address that traffic will be filtered from.
Protocol:
You can select from
None/TCP/UDP/ICMP
as the traffic type you
would like to filter.
Destination Port Range:
The range of ports that traffic will be filtered to.
Enter the beginning and end of the port range for each application.
– For a single port, enter the port number in both fields.
– For a port range, enter the beginning of the range in the 
first
 field and the
end of the range in the 
second
 field.
Source Port Range:
The range of ports that traffic will be filtered from.
Action:
Selecting
Drop
or
Accept
will determine if the rule will allow or block
traffic based on the criteria specified.
Comment:
Here you will need to add a name or description to the rule in
order to click “Apply” to save and implement the rule.
42
Firewall - Port Forwarding
Port Forwarding allows for specific external ports on the AT&T Home Base to be
mapped to specific ports on a specific device on the internal network. You can
have a maximum of 10 Port Forwarding/Virtual Server rules in the system.
You can
enable
or
disable
Port Forwarding to allow certain devices to act as virtual
servers within the internal AT&T Home Base network.
If you select
Enable
, the Virtual Server Settings will appear:
IP Address:
Enter the internal IP address (i.e. 192.168.1.101) that you would like
traffic from a specific external port directed to internally.
Port Range:
Enter the starting and ending port numbers that will be directed
to the internal device.
Protocol:
You may pick
TCP
,
UDP
, or
TCP+UDP
traffic types to be directed.
Comment:
Enter a comment or label to be saved with this custom port
forwarding rule.
Be sure to click “Apply” to confirm your configuration.
43
Page 27 / 33
Firewall - DMZ
The
DMZ
, or De-Militarized Zone, is a selected internal IP address of a device that
allows full access and connectivity from outside traffic, through the firewall, to a
specific internal device without being filtered or blocked by the AT&T Home Base.
DMZ Settings:
You may choose to enable or disable the DMZ setting here.
DMZ is set to
Disable
by default.
DMZ IP Address:
Enter the internal IP address of the desired device that will be
directly accessible from outside the firewall.
44
Advanced
Advanced - Administrator
This page allows you to change the default login (attadmin) that is used to access
the AT&T Home Base Manager.
Current Login:
Enter the current login for the AT&T Home Base Manager in this
field. The default login is “attadmin.”
New Login:
Enter the new login, using only letters, numbers, and standard
punctuation symbols. The password must be at least four (4) characters long. The
maximum length is 32 characters.
Verify New Login:
Re-enter the new login in this field, then click “Apply.”
Note:
Once you change the default login, there is no way to retrieve the new
login. You must reset the AT&T Home Base to its factory settings to restore the
login to the default login “attadmin.” Remove the bottom cover of your AT&T
Home Base and using a ballpoint pen, press and hold the
RESET button
for
five (5) seconds.
Login Visibility:
If this setting is enabled (On), the Login is readable on the screen.
If disabled (Off), the Login appears as
•••.
45
Page 28 / 33
Advanced – Router
IP Address:
The IP address for this device as seen from the local network.
IP Address:
The IP address for this device, as seen from the local network. This
is set to a default value.
Subnet Mask:
The default value 255.255.255.0 is standard for small (class “C”)
networks.
MAC Address:
The MAC Address is a network identifier. This read-only field
displays the MAC Address for the Wi-Fi interface on this device.
DHCP Server:
This option is set to
Enable
by default. The DHCP server allocates
an IP address to each Connected Device.
DHCP IP Pool:
This is the IP address range used by the DHCP server. This indicates
the range of IP addresses which may be allocated to connected devices.
46
DHCP Lease Time:
This specifies the time period (in hours) for how long each
device is assigned an internal IP address.
UPnP:
Universal Plug and Play (UPnP) is a set of networking protocols that permits
networked devices to discover each other’s presence on the network. The default
value for this setting is
Disable
.
VPN Passthrough:
This feature allows VPN client software on connected devices
to connect through this device to remote VPN servers. Normally, this option
should be set to
Enabled
.
Advanced – Time/Date
Current Local Time:
Displays the current date and time on the device.
Time Set Mode:
Select from
Manual Set Time
or
SNTP Auto Synchronization
to
determine how the AT&T Home Base determines local time.
Manual Set Time
– Selecting this option will allow you to manually set the
Month, Day, Year, Hour, Minute, and AM/PM parameters for your local time.
Click “Apply” for changes to take effect.
SNTP Auto Synchronization
– SNTP, or Simple Network Time Protocol, is
used to allow synchronization of the date and time between your device and
the system time on the network. You can pick up to three SNTP Servers you
want your device to synchronize with, including specifying a server not listed
by selecting “Other” from the dropdown and typing in the server address. You
can also set the Time Zone and Daylight Saving Time status.
Advanced – Device Reset
This screen provides the ability to reset all settings to the factory default values
and restart the device.
Device Reset:
Click the 
Reset
 button to reset all settings to their factory default
values. This causes a restart, and changes the current Wi-Fi settings if they do
not match the factory default values. In this case, all connected devices need to
reconnect using the default Wi-Fi settings.
Restart Device:
Click the 
Restart
 button to power off and restart the device.
47
Page 29 / 33
Specifications
Dimensions (W×D×H)
5.43" (W) × 5.43" (D) × 1.18" (H)
Weight
11.6 oz. (including back-up battery)
Back-up Battery
1,500 mAh
Talk time
approximately 100 minutes
Standby time
approximately 18 hours
Note:
The value of the talk time or standby time varies with the actual environment.
48
Safety Instructions
•
Some electronic devices may be susceptible to electromagnetic interference.
Locate the router away from TV set, radio and other electronic equipment to
avoid electromagnetic interference.
•
The router may interfere with medical devices like hearing aids and pacemakers.
Consult a physician or the manufacturer of the medical device before using
the router.
•
Please keep yourself at least eight (8) inches away from router.
•
Do not use your router in dangerous environments such as oil terminals or
chemical factories where there are explosive gases or explosive products
being processed.
•
Please use original accessories or accessories that are authorized by ZTE.
Unauthorized accessories may affect the router performance, damage the
router or cause danger to you.
•
Do not attempt to dismantle the router. There are no user serviceable parts.
•
Do not allow the router or accessories to come into contact with liquid or
moisture at any time. Do not immerse the router in any liquid.
•
Do not place objects on top of the router. This may lead to overheating of the
device.
•
The device must be placed in ventilated environment for use.
•
Do not expose the router to direct sunlight or store it in hot areas. High
temperature can shorten the life of electronic devices.
•
Do not allow children to play with the router or charger.
•
Keep the length of the cable between the router and the phone less than
11 yards.
•
The router is for indoor use only. Do not use the router outside. Do not connect
telephone extensions which run outside of the building. These can result in
lightning damage to your unit.
49
Page 30 / 33
Radio Frequency (RF) Energy
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal Communications
Commission of the U.S. Government:
The exposure standard for wireless mobile devices employs a unit of
measurement known as the Specific Absorption Rate, or SAR. The SAR limit set
by the FCC is 1.6 W/kg.*
While there may be differences between the SAR levels of various devices and at
various positions, they all meet the government requirement.
The FCC has granted an Equipment Authorization for this device with all reported
SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR
information on this device is on file with the FCC and can be found under the
Display Grant section of
after searching
FCC ID: Q78-Z700
.
*Tests for SAR are conducted using standard operating positions accepted by the FCC with
the device transmitting at its highest certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified power level, the actual SAR level of
the device while operating can be well below the maximum value. This is because the device
is designed to operate at multiple power levels so as to use only the power required to reach
the network. In general, the closer you are to a wireless base station antenna, the lower the
power output.
50
FCC Regulations
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user‘s authority to operate the equipment.
51

Rate

4.7 / 5 based on 3 votes.

Popular AT&T Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top