1. Home
    2. /
  2. Manuals
    3. /
  3. ASUS
    4. /
  4. AM604G
    5. /
  5. 8
Page 36 / 59 Scroll up to view Page 31 - 35
Routing
Default Gateway
You can enable automatic assigned default gateway on the
Routing – Default Gateway screen.
As default, the box is checked
for automatic assigned default gateway to be enabled.
Click the
Save / Apply button to enable or disable this feature.
Static Route
Use the Routing – Static Route screen to add a static route to the
routing table.
Enter the route information and click on Save/Apply to make it
active.
No reboot is required.
ASUS 4-Port Wireless Ethernet Router
User Manual
35
Version 1.0
Document #:
BD-AU0014-10
Downloaded from
www.Manualslib.com
manuals search engine
Page 37 / 59
RIP
If RIP is enabled, the router operation can be configured as active
or passive.
DNS
DNS Server
Use the DNS Server screen to request automatic assignment of a
DNS or to specify a primary and secondary DNS.
ASUS 4-Port Wireless Ethernet Router
User Manual
36
Version 1.0
Document #:
BD-AU0014-10
Downloaded from
www.Manualslib.com
manuals search engine
Page 38 / 59
If the automatic assigned DNS checkbox is not selected, then
enter the primary and secondary DNS Server IP addresses as
illustrated below.
Dynamic DNS
Dynamic DNS (D-DNS) allows you to have your own permanent
domain name linked to your dynamic IP address.
To configure a
dynamic DNS, click on Add.
If you have already created a
dynamic DNS that you want to delete, click on Remove.
The below screen allows you to set up the Dynamic DNS
provider.
Note that you will have to first register at the Dynamic
ASUS 4-Port Wireless Ethernet Router
User Manual
37
Version 1.0
Document #:
BD-AU0014-10
Downloaded from
www.Manualslib.com
manuals search engine
Page 39 / 59
DNS site that you wish to use.
Select from either
DynDNS.org
or
TZO
.
Then enter the hostname and the interface that you want to
establish the D-DNS address to. Enter the username / password
for the D-DNS account that you have signed up for and then click
on Save / Apply.
ADSL
There are three major items in the ADSL settings:
Modulation Methods
Six modulation methods for different linking speed are supported
by the 6211 ADSL router: G.Dmt Enabled, G.lite Enabled, T1.413
Enabled, ADSL Enabled, Annex L Enabled, and ADSL2+
Enabled. Set this value only as directed by your ISP.
Phone Line Pair
The 6211 ADSL router supports phone lines on pins 2 and 3 or
pins 1 and 4 to connect your ADSL line. If your phone system
uses pins 2 and 3, attach a normal RJ11 cable to the router and
select “Inner pair” on the screen; if your phone system uses pins 1
and 4, attach the phone with the supplied RJ11 cable and select
“Outer pair” on the screen.
Capability
Do not change these settings unless directed by your ISP.
ASUS 4-Port Wireless Ethernet Router
User Manual
38
Version 1.0
Document #:
BD-AU0014-10
Downloaded from
www.Manualslib.com
manuals search engine
Page 40 / 59
DSL Advanced Settings
The test mode can be selected from the DSL Advanced Settings
page.
Test modes are as follows—
•
Normal
•
Reverb
•
Medley
•
No retrain
•
L3
ASUS 4-Port Wireless Ethernet Router
User Manual
39
Version 1.0
Document #:
BD-AU0014-10
Downloaded from
www.Manualslib.com
manuals search engine

Rate

4.5 / 5 based on 2 votes.

Popular ASUS Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top