Page 16 / 59
Scroll up to view Page 11 - 15
ADSL Statistics
You can view ADSL statistics by clicking on the “ADSL” item
under “Statistics”.
Information contained in this screen is useful
for troubleshooting and diagnostics of connection problems.
ASUS 4-Port Wireless Ethernet Router
User Manual
15
Version 1.0
Document #:
BD-AU0014-10
Downloaded from
www.Manualslib.com
manuals search engine
Page 17 / 59
ADSL BER Test
A Bit Error Rate Test (BER Test) is a test that reflects the ratio of
error bits to the total number transmitted.
If you click on the ADSL BER Test button at the bottom of the
ADSL Statistics page, the following pop-up screen will appear
allowing you to set the tested time and to begin the test.
Below is an ADSL BER Test result screen displaying information
about the test including the error bits and ratio.
ASUS 4-Port Wireless Ethernet Router
User Manual
16
Version 1.0
Document #:
BD-AU0014-10
Downloaded from
www.Manualslib.com
manuals search engine
Page 18 / 59
Route
Access the routing status report from the router by clicking on the
“Route” item under “Device Info”.
ARP
Access the ARP status report from the router by clicking on the
“ARP” item under “Device Info”.
ASUS 4-Port Wireless Ethernet Router
User Manual
17
Version 1.0
Document #:
BD-AU0014-10
Downloaded from
www.Manualslib.com
manuals search engine
Page 19 / 59
Quick Setup
This section will explain how to quickly configure the router for the
main purpose of connecting to the Internet.
If you need to
configure any advanced functions, then those can be performed
in the advanced section.
ATM PVC Configuration
To enable the auto-connect process, click on the box labeled DSL
Auto-connect, a process that will automatically detect the first
usable PVC and automatically detect PPPoE, PPPoA, and Bridge
Protocol (with DHCP Server available).
To continue, click on the
Next button.
If you do not use DSL Auto-connect, then you may need to
change the VPI and VCI numbers.
Quality of service can also be
enabled on this screen.
Furthermore, if you do not use DSL Auto-connect, then you will
need to select the connection type and encapsulation mode from
a list as shown below.
ASUS 4-Port Wireless Ethernet Router
User Manual
18
Version 1.0
Document #:
BD-AU0014-10
Downloaded from
www.Manualslib.com
manuals search engine
Page 20 / 59
The next screen to appear will depend on the connection type that
was selected in the previous screen.
The next screen lets you decide if you want to enable NAT,
firewall, IGMP multicast, and WAN service.
ASUS 4-Port Wireless Ethernet Router
User Manual
19
Version 1.0
Document #:
BD-AU0014-10
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live