Page 21 / 59
Scroll up to view Page 16 - 20
The following is the Device Setup screen where you enter the IP
address / subnet mask as well as enable or disable DHCP server.
The last screen under the Quick Start section allows you to set up
the wireless feature of the router.
ASUS 4-Port Wireless Ethernet Router
User Manual
20
Version 1.0
Document #:
BD-AU0014-10
Downloaded from
www.Manualslib.com
manuals search engine
Page 22 / 59
When you click on Next, the summary screen shows the settings
made under WAN setup.
ASUS 4-Port Wireless Ethernet Router
User Manual
21
Version 1.0
Document #:
BD-AU0014-10
Downloaded from
www.Manualslib.com
manuals search engine
Page 23 / 59
Advanced Setup
This section of the user manual is on the advanced configurations
of the router.
The topics under Advanced Setup are
WAN, LAN,
NAT, firewall, QoS, routing, DNS, ADSL,
and
port mapping.
WAN
Configure the WAN settings as provided by your ISP.
Click on the Add button if you want to add a new rule for the WAN
interface.
The ATM PVC Configuration screen appears.
The ATM PVC Configuration screen allows you to configure an
ATM PVC identifier (VPI and VCI) and select a service category.
Verify the following values with your ISP before you change them.
•
VPI: Virtual Path Identifier. The valid range is 0 to 255.
•
VCI: Virtual Channel Identifier. The valid range is 32 to
65535.
ASUS 4-Port Wireless Ethernet Router
User Manual
22
Version 1.0
Document #:
BD-AU0014-10
Downloaded from
www.Manualslib.com
manuals search engine
Page 24 / 59
ASUS 4-Port Wireless Ethernet Router
User Manual
23
Version 1.0
Document #:
BD-AU0014-10
•
Service Category: Five classes of traffic are listed—
o
UBR Without PCR
o
UBR With PCR
o
CBR
o
Non Realtime VBR
o
Realtime VBR
Enabling QoS for a PVC improves performance for selected
classes of applications.
However, since QoS also consumes
system resources, the number of PVCs is reduced.
If you want to
enable QoS service, click on the Enable Quality Of Service check
box.
Connection Type
This screen shows the below types of network protocols and
encapsulation modes—
•
PPP over ATM (PPPoA)
•
PPP over Ethernet (PPPoE)
•
MAC Encapsulation Routing (MER)
•
IP over ATM (IpoA)
•
Bridging
Select the mode that your ISP has instructed you to use and click
on Next.
Also available is the option to enable 802.1q, a standard to allow
multiple bridged networks to transparently share the same
physical network link without leakage of information between
networks (i.e. "trunking").
Click on the checkbox if you wish to
enable this function.
Downloaded from
www.Manualslib.com
manuals search engine
Page 25 / 59
After you click on Next, the below screen appears allowing you
disable the bridge service if desired.
When the settings are complete, the next screen shows a WAN
Setup – Summary screen displaying the WAN configurations
made.
ASUS 4-Port Wireless Ethernet Router
User Manual
24
Version 1.0
Document #:
BD-AU0014-10
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live