Page 31 / 89
Scroll up to view Page 26 - 30
3
Click the
Login
link in the Access bar to display the Login screen:
Note
: The Telephony Modem ships with no password configured. When you
log in for the first time, leave the Password field blank.
4
Click the
Submit
button to return to the Status screen.
Note
: The Access bar should now show Logout in place of Login.
5
Proceed to
Configuring System Settings
.
Touchstone WTM652 Telephony Modem User’s Guide
Safety
Getting
Started
Battery
Installation
Installation
Wireless
Configuration
Ethernet
Configuration
Usage
Troubleshooting
Glossary
31
Page 32 / 89
Configuring System Settings
1
Click the Utilities link (at the bottom of the Navigation menu) to open the
Utilities menu, then click System Settings to access the System Settings
screen:
2
Make changes as follows:
•
Enter Current Password
: If you have already created a password, and
you want to change settings on this screen, enter the password here.
•
Enter New Password
: Enter a password that you will remember but is
not easy to guess.
•
Confirm new Password
: Enter the same password again.
Touchstone WTM652 Telephony Modem User’s Guide
Safety
Getting
Started
Battery
Installation
Installation
Wireless
Configuration
Ethernet
Configuration
Usage
Troubleshooting
Glossary
32
Page 33 / 89
•
Time Zone
: Select the proper time zone for your location. The Tele-
phony Modem uses an Internet time server to set its internal clock.
3
Scroll down to the bottom of the page and click the
Save
button. If you are
prompted to log in again, type your new password and click the
Submit
button.
4
Proceed to
Setting Up Your WAN Connection
.
Setting Up Your WAN Connection
Follow these steps to set up your WAN connection.
1
Click the WAN Setup link in the navigation menu, then click Connection Type.
The Connection Type screen appears:
2
Choose the correct connection type in the Connection Type screen. Most ca-
ble companies require the Dynamic connection type. If your cable company
requires a different connection type, you should have an information sheet
that shows the proper connection type to select and other information need-
ed to set up the connection.
Touchstone WTM652 Telephony Modem User’s Guide
Safety
Getting
Started
Battery
Installation
Installation
Wireless
Configuration
Ethernet
Configuration
Usage
Troubleshooting
Glossary
33
Page 34 / 89
3
Click the
Next
button at the bottom of the screen (you may have to scroll
down in the browser to see the Next button). The Telephony Modem dis-
plays a screen showing further settings for your connection type. Follow the
appropriate link for your connection type:
•
Dynamic
•
Static
•
PPPoE
•
L2TP
Dynamic
a.
Fill in the Host Name field, using any name you want.
b.
If you need to clone your computer’s MAC address, click the Change WAN
MAC Address link and proceed to
Setting the MAC Address
.
c.
Click the
Save
button.
d.
Proceed to
Configuring the LAN Channel and Name
.
Touchstone WTM652 Telephony Modem User’s Guide
Safety
Getting
Started
Battery
Installation
Installation
Wireless
Configuration
Ethernet
Configuration
Usage
Troubleshooting
Glossary
34
Page 35 / 89
Static
a.
Fill in the IP Address, Subnet Mask, and ISP Gateway address fields with the
information provided by your cable company.
b.
If you need to enter DNS settings, click the link and proceed to
Setting Up
DNS
.
c.
Click the
Save
button.
d.
Proceed to
Configuring the LAN Channel and Name
.
Touchstone WTM652 Telephony Modem User’s Guide
Safety
Getting
Started
Battery
Installation
Installation
Wireless
Configuration
Ethernet
Configuration
Usage
Troubleshooting
Glossary
35
19216811.live