Administrator’s Handbook
42
Home Network Status
Device IPv4 Address
The Gateway’s own IP address on the network.
DHCP Netmask
The Gateway’s own netmask on the network.
DHCPv4 Start Address
The starting IP address of the DHCP range served by the Gateway.
DHCPv4 End Address
The ending IP address of the DHCP range served by the Gateway.
DHCP Leases Available
The number of IP addresses of the DHCP range available to be served by the
Gateway.
DHCP Leases Allocated
The number of IP addresses of the DHCP range currently being served by the
Gateway.
DHCP Primary Pool
Source pool of the IP addresses served by the Gateway, Public or Private.
IPv6
Status
May be
Enabled
or
Unavailable
.
Global IPv6 Address
The public IPv6 address of your device, whether dynamically or statically
assigned.
Link-local IPv6 Address
The private IPv6 address of your device, whether dynamically or statically
assigned.
Router Advertisement
Prefix
The IPv6 prefix to include in router advertisements.
IPv4 Statistics
Transmit Packets
IPv4 packets transmitted.
Transmit Errors
Errors on IPv4 packets transmitted.
Transmit Discards
IPv4 packets dropped.
IPv6 Statistics
Transmit Packets
IPv6 packets transmitted.
Transmit Errors
Errors on IPv6 packets transmitted.
Transmit Discards
IPv6 packets dropped.
Wireless Status
Wireless Radio Status
Indicates whether the Wi-Fi radio is
Enabled
or
Disabled
.
Network Name (SSID)
This is the name or ID that is displayed to a client scan. The default SSID for
the Gateway is
attxxx
where
xxx
is the last 3 digits of the serial number
located on the side of the Gateway.
Hide SSID
May be either
On
or
Off
. If On, your SSID will not appear in a client scan.
Wireless Security
The type of wireless encryption security in use. May be
Disabled
,
WPA
or
WEP
,
Default Key
or
Manual
.
Network Key
Shows the information of the security encryption key in use.
Mode
May be 802.11
B
only, 802.11
G
only, 802.11
N
, or 802.11
B/G/N
.
Bandwidth
The capacity of the wireless LAN to carry traffic in megahertz.
Current Radio Channel
The radio channel that your Wi-Fi network is broadcasting on.
Radio Channel Selection
May be set to
automatic
or manually selected.
MAC Address Filtering
May be either
On
or
Off
. If On, you can accept or block client devices from
your WLAN based on their MAC address.
Power Level
May be adjusted up to 100%, lower if multiple wireless access points are in
use, and might interfere with each other.
19216811.live