1. Home
    2. /
  2. Manuals
    3. /
  3. Arris
    4. /
  4. NVG589 Frontier
    5. /
  5. 33
Page 161 / 216 Scroll up to view Page 156 - 160
161
set voip phone
n
codec G729 priority [ 1 | 2 | 3 | 4 | 5 | 6 | 7 | none ]
Assigns a priority to the
G729 annex A
codec, the common analog voice compression implementation used in
North America.
set voip phone
n
codec G726_16 priority [ 1 | 2 | 3 | 4 | 5 | 6 | 7 | none ]
Assigns a priority to the
G726-16
codec, a common audio media type implementation at 16 kbit/s.
set voip phone
n
codec G726_24 priority [ 1 | 2 | 3 | 4 | 5 | 6 | 7 | none ]
Assigns a priority to the
G726-24
codec, a common audio media type implementation at 24 kbit/s.
set voip phone
n
codec G726_32 priority [ 1 | 2 | 3 | 4 | 5 | 6 | 7 | none ]
Assigns a priority to the
G726-32
codec, a common audio media type implementation at 32 kbit/s.
set voip phone
n
codec G726_40 priority [ 1 | 2 | 3 | 4 | 5 | 6 | 7 | none ]
Assigns a priority to the
G726-40
codec, a common audio media type implementation at 40 kbit/s.
Advanced settings
set voip phone
n
sip-advanced-setting sip-dtmf-mode [ inband | rfc2833 | info ]
sip-dtmf-mode
– sets the Dual Tone Multi-Frequency Mode:
◆
inband
: sends the DTMF digits as a normal inband tone.
◆
rfc2833
: (default) sends the DTMF digits as an event as part of the RTP packet header
information.
◆
info
: sends the DTMF digits in the SIP INFO message.
set voip phone
n
sip-advanced-setting sip-hk-flash-mode [ cpe | info ]
Sets the behavior of the flash hook mode for the specified phone line. Default is
info
.
set voip phone
n
sip-advanced-setting sip-session-refresher
[ local | remote | auto ]
Sets the method for refreshing the SIP session. Default is
auto
.
set voip phone
n
sip-advanced-setting sip-dynamic-payload [ 96 - 110 ]
Specifies a default dynamic payload value for a named telephony event. Default is
101
.
set voip phone
n
sip-advanced-setting sip-digit-map
string
Specifies rules used to recognize a number dialed by the user and to ensure this number matches the
dial plan defined by the ITSP.
set voip phone
n
sip-advanced-setting sip-compact-header [ off | on ]
Forces all headers in the message to use compact format when set to
on
. Sends the SIP messages with Compact
Headers, reducing the size of the SIP messages.
Page 162 / 216
Administrator’s Handbook
162
set voip phone
n
sip-advanced-setting sip-q-value [ 0 - 10 ]
This is used to prioritize the SIP account based on the value.
set voip phone
n
sip-advanced-setting sip-qos-tos-value [ 0 - 255 ]
Specifies the SIP Diff-Serv Type of Service (ToS) values for Quality of Service (QoS) assignment. Default is
136
.
set voip phone
n
sip-advanced-setting sip-qos-p-bit-value [ 0 - 7 ]
Sets a QoS P-bit value for the SIP session. Default is
6
.
set voip phone
n
sip-advanced-setting sip-qos-marker-value
value
Sets a QoS marker on the SIP session packets on the specified phone line.
set voip phone
n
sip-advanced-setting rtp-qos-tos-value [ 0 - 255 ]
Specifies the RTP Diff-Serv Type of Service (ToS) values for Quality of Service (QoS) assignment. Default is
184
.
set voip phone
n
sip-advanced-setting rtp-qos-p-bit-value [ 0 - 7 ]
Sets a QoS P-bit value for the RTP session. Default is
6
..
set voip phone
n
sip-advanced-setting rtp-qos-marker-value
value
Sets a QoS marker on the RTP session packets on the specified phone line.
set voip phone
n
sip-advanced-setting fax-redundancy-level [ 0 - 1 ]
Specifies
the level of fax redundancy for t38
fax data rate management.
set voip phone
n
sip-advanced-setting sip-init-de-register [ off | on ]
Turns SIP de-registration on or off. Default is
off
.
set voip phone
n
sip-advanced-setting sip-known-ip-list
string
Specifies a known IP address list of SIP servers for the SIP session.
Advanced telephony settings
The telephony features include advanced settings for fine tuning phone behavior. The following codecs and asso-
ciated
value
defaults are supported:
Codec G711U
Codec G711A
Codec G729
Codec G726_16
packetization-time
20
20
20
20
jitter-max-reorder-delay
50
50
50
50
jitter-max-accept-late-seq-
num
200
200
200
200
jitter-initial-delay
80
80
80
80
jitter-exe-frame-del-mode
off
off
off
off
Page 163 / 216
163
Syntax is as follows:
set voip advanced-telephony-setting codec
codec
packetization-time
value
set voip advanced-telephony-setting codec
codec
jitter-max-reorder-delay
value
set voip advanced-telephony-setting codec
codec
jitter-max-accept-late-seq-num
value
set voip advanced-telephony-setting codec
codec
jitter-initial-delay
value
set voip advanced-telephony-setting codec
codec
jitter-exe-frame-del-mode
[ off | on ]
set voip advanced-telephony-setting codec
codec
jitter-max-transit-delay
value
set voip advanced-telephony-setting codec
codec
jitter-peak-transit-delay
value
set voip advanced-telephony-setting codec
codec
jitter-delay-buff-inc
value
jitter-max-transit-delay
250
250
250
250
jitter-peak-transit-delay
475
475
475
475
jitter-delay-buff-inc
10
10
10
10
jitter-transit-delay-threshold
10000
10000
10000
10000
Codec G726_24
Codec G726_32
Codec G726_40
packetization-time
20
20
20
jitter-max-reorder-delay
50
50
50
jitter-max-accept-late-seq-
num
200
200
200
jitter-initial-delay
80
80
80
jitter-exe-frame-del-mode
off
off
off
jitter-max-transit-delay
250
250
250
jitter-peak-transit-delay
475
475
475
jitter-delay-buff-inc
10
10
10
jitter-transit-delay-threshold
10000
10000
10000
Codec G711U
Codec G711A
Codec G729
Codec G726_16
Page 164 / 216
Administrator’s Handbook
164
set voip advanced-telephony-setting codec
codec
jitter-transit-delay-threshold
value
set voip advanced-telephony-setting fxs-port-setting-for-fxo
[ none | fxs1 | fxs2 | both | emgncy ]
Sets a port to be used for the FXS (Foreign eXchange Subscriber interface) port to the FXO (Foreign eXchange
Office interface -- the phone) port. Default is
none
,
set voip advanced-telephony-setting rtp-port-range-start
value
set voip advanced-telephony-setting rtp-port-range-end
value
Sets the start and end port values for the RTP port range. Although no ports are specified for the RTP protocol, the
RTP data is to be carried on an even UDP port number. The defaults in use for the Motorola Gateway are
8024
and
8036
, respectively.
set voip advanced-telephony-setting rtcp-option [ off | on ]
Turns Real-Time Transport Control Protocol on or off. RTCP supports and controls RTP media streams, but does
not itself deliver media streams. Default is
off
.
set voip advanced-telephony-setting t38-option [ off | on ]
Turns T.38 fax capability on or off. Default is
off
.
set voip advanced-telephony-setting sip-session-timer-value
seconds
Sets a timer in seconds for SIP sessions to periodically verify that an established session is still active. Default is
2280
.
set voip advanced-telephony-setting sip-t1-timer-value
milliseconds
Sets a SIP T1 timer value, an estimate of the round trip time, in milliseconds from 100 – 5000. Default is
500
.
set voip advanced-telephony-setting sip-dynamic-line-selection [ off | on ]
Turns dynamic (next available) line selection off or on. Default is
off
.
set voip RegionSpecificSettings Region-Code
region_code
Specifies the set of standards in use for the geographical region. Example: "USA_DEFAULT".
set voip RegionSpecificSettings fxs-hook-flash-min-time
seconds
Specifies the minimum Foreign Exchange Station ( FXS) hookflash time in seconds. Default is
280
.
set voip RegionSpecificSettings fxs-hook-flash-max-time
seconds
Specifies the maximum Foreign Exchange Station ( FXS) hookflash time in seconds. Default is
1100
.
set voip RegionSpecificSettings fxs-debounce-onoff-hook-delay
seconds
Specifies the on/off-hook debounce time delay for removing the ripple signal, in seconds. Default is
100
.
Page 165 / 216
165
set voip RegionSpecificSettings fxs-debounce-offon-hook-delay
seconds
Specifies the off/on-hook debounce time delay for removing the ripple signal, in seconds. Default is
300
.
Call feature settings
set voip phone
n
call-feature call-forwarding-all-option [ off | on ]
call-forwarding-all-option
– turns unconditional call forwarding
on
or
off
.
set voip phone
n
call-feature call-forwarding-on-busy-option [ off | on ]
call-forwarding-on-busy-option
– turns call forwarding when line is busy
on
or
off
.. Default is
off
.
set voip phone
n
call-feature call-forwarding-on-no-answer-option [ off | on ]
call-forwarding-on-no-answer-option
– turns call forwarding when there is no answer
on
or
off
.
set voip phone
n
call-feature call-waiting-option [ off | on ]
call-waiting-option
– enables or disables call waiting.
set voip phone
n
call-feature call-conferencing-option [ off | on ]
call-conferencing-option
– enables or disables 3-way call conferencing.
set voip phone
n
call-feature do-not-disturb-option [ off | on ]
do-not-disturb-option
– enables or disables option to prevent the phone from ringing.
set voip phone
n
call-feature subscribe-mwi-option [ off | on ]
subscribe-mwi-option
– if set to
on
, the Message Waiting Indicator is enabled when new voice mail is received.
set voip phone
n
call-feature anonymous-call-block-option [ off | on ]
anonymous-call-block-option
– if set to
on
, blocks calls from unidentified sources, such as those with caller-ID
blocking.
set voip phone
n
call-feature call-transfer-option [ off | on ]
call-transfer-option
– if set to
on
, permits call transfer to another phone.
DSP settings
set voip phone
n
dsp-settings echo-option [ echo-off | echo-on | echo-on-nlp |
echo-on-cng-nlp ]
echo-option
– specifies under what conditions the system invokes or disables echo cancellation. Default is
echo-
on-cng-nlp
(Comfort Noise Generation with non-linear processor).
set voip phone
n
dsp-settings echo-start-attenuation [ 0 - 65535 ]
echo-start-attenuation
– specifies the minimum attenuation level at which to invoke echo cancellation. Default is
8192
.

Rate

4.5 / 5 based on 2 votes.

Popular Arris Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top