Page 31 / 47
Scroll up to view Page 26 - 30
6
Select
Internet Protocol Version 4 (TCP/IPv4)
and click
Properties
to
configure TCP/IPv4.
Note:
If your cable provider requires TCP/IP version 6, select
Internet Pro-
tocol Version 6 (TCP/IPv6)
and click
Properties
to configure TCP/IPv6.
The TCP/IP properties window for the version you selected displays.
7
For either TCP/IPv4 or TCP/IPv6, select
Obtain an IP address automati-
cally
and
Obtain DNS server
address automatically
, unless instructed
otherwise by your cable provider.
8
Click
OK
to accept the new settings and close the Properties window. Then
click
Close
to back out of the remaining setup screens.
Touchstone DG860 Data Gateway User’s Guide
Safety
Getting
Started
Installation
Ethernet
Configuration
Usage
Troubleshooting
Glossary
31
TCP/IPv4 Properties
TCP/IPv6 Properties
Page 32 / 47
TCP/IP Configuration for MacOS X
Follow these steps to configure the Ethernet interface on a MacOS X operating sys-
tem.
1
Open System Preferences, either by choosing System Preferences from the
Apple menu or by clicking the System Preferences icon in the dock.
Touchstone DG860 Data Gateway User’s Guide
Safety
Getting
Started
Installation
Ethernet
Configuration
Usage
Troubleshooting
Glossary
32
Page 33 / 47
2
Click the
Network
icon.
Touchstone DG860 Data Gateway User’s Guide
Safety
Getting
Started
Installation
Ethernet
Configuration
Usage
Troubleshooting
Glossary
33
Page 34 / 47
3
Choose
Automatic
from the Location drop-down menu, and
Built-in Eth-
erne
t from the Show menu.
4
Choose the TCP/IP tab, if necessary.
If you are using
TCP/IPv4
, go to
step 5
.
If your cable provider requires
TCP/IPv6
, go to
step 8
.
5
Choose
Using DHCP
from the Configure IPv4 menu.
6
If necessary, click the
Renew DHCP Lease
button.
7
Close the System Properties application.
TCP/IPv4 configuration is completed.
Touchstone DG860 Data Gateway User’s Guide
Safety
Getting
Started
Installation
Ethernet
Configuration
Usage
Troubleshooting
Glossary
34
Page 35 / 47
8
If you are using TCP/IPv6, click
Configure IPv6
near the bottom of the pre-
vious window.
9
Choose
Automatically
from the Configure IPv6 drop-down menu and click
OK
.
10
Close the System Properties application.
Touchstone DG860 Data Gateway User’s Guide
Safety
Getting
Started
Installation
Ethernet
Configuration
Usage
Troubleshooting
Glossary
35
19216811.live