1. Home
    2. /
  2. Manuals
    3. /
  3. Alvarion
    4. /
  4. BMAX-6000 Telrad
    5. /
  5. 18
Page 86 / 138 Scroll up to view Page 81 - 85
BreezeMAX PRO 6000 Product Manual
Chapter 7 - Displaying Status Details
Introduction
64
7.1
Introduction
This chapter describes how to view and understand the various parameters that are currently set on your
unit. The Status menu item includes pages containing information on all the features of the device, such
as the device currently used software, the Telephony status, WiMAX parameters, certification
information, etc.
Page 87 / 138
BreezeMAX PRO 6000 Product Manual
Chapter 7 - Displaying Status Details
Device Status
65
7.2
Device Status
This page displays the status of the unit such as system uptime and WAN information.
Click
Refresh
to display the current device status.
Click
Auto
to update the status information periodically.
The following information is displayed:
Figure 7-1: Status - Device Status
Table 7-1: Device Status Parameters
Item
Description
Operation Mode
The mode for forwarding data packets from the service provider’s WiMAX
network to the local network, as defined in
“Setting Basic Parameters” on
page 37
. Available option: Router.
Connection Mode
Connection type for the unit, as defined in
“Setting Basic Parameters” on
page 37
. Available options: DHCP, Static
IP Address
WAN IP address, if the Static connection mode was selected, as defined in
“Setting Basic Parameters” on page 37
. For DHCP mode - IP address
acquired on the WAN interface is displayed. Otherwise it is 0.0.0.0
MAC
WAN MAC Address for data interface
Page 88 / 138
BreezeMAX PRO 6000 Product Manual
Chapter 7 - Displaying Status Details
Device Status
66
IP Subnet Mask
The IP subnet mask, if the Static connection mode was selected, as defined
in
“Setting Basic Parameters” on page 37
, For DHCP mode - IP Subnet
Mask acquired on the WAN interface is displayed. Otherwise it is 0.0.0.0
IP Default Gateway
The IP Default Gateway, if the Static connection mode was selected, as
defined in
“Setting Basic Parameters” on page 37
. For DHCP mode - IP
Default Gateway acquired on the WAN interface is displayed. Otherwise it
is 0.0.0.0
IP Default Connection
IP is connected to the network (On/Off)
Firewall
Firewall enabled or disabled (on/off), as set in
“Firewall” on page 55
.
Lease Obtained-Data
Date of obtaining the device leasing.
Lease Expires-Data
Date of device leasing expiration.
DNS Server
The Domain Name Server address
Time Server
The NTP (Network Time Protocol) server address
Device Up Time
Duration of device function (xdays yhours zminutes)
Device Restart Reason
The reason for last device reboot (e.g. Software Upgrade)
Serving BSID
Base Station ID number (e.g. 00:01:21:00:03:5A)
RSSI
Currently received signal strength indication (e.g. -70 dBm)
CINR
Carrier to Interference-plus-Noise Ratio [in decibels (dB)] (e.g. 13 dB). This
value should be maximized for best signal quality.
Table 7-1: Device Status Parameters (Continued)
Item
Description
Page 89 / 138
BreezeMAX PRO 6000 Product Manual
Chapter 7 - Displaying Status Details
WiMAX Status
67
7.3
WiMAX Status
The WiMAX Status displays a summary of the WiMAX network connection parameters.
Click
Refresh
to display the current WiMAX connection status.
Click
Auto
to update the status information periodically (every 3 seconds)
The following table describes the WiMAX Status parameters:
Figure 7-2: Status - WiMAX Status
Page 90 / 138
BreezeMAX PRO 6000 Product Manual
Chapter 7 - Displaying Status Details
WiMAX Status
68
Table 7-2: WiMAX System Parameters
Parameter
Description
Possible values
WiMAX System
State
The status of WiMAX connection.
Network Entry - the unit has just
been connected to the network
Operational - the unit is functional
Scan - the unit scans the network
Idle - the unit is de-registered from
the network, however will
continue to scan the network and
keep track of its location
BSID
The Base Station ID
Depends on the BS to which the unit
is connected
CINR
Carrier to Interference-plus-Noise
Ratio [in decibels (dB)] - a
measurement of signal effectiveness.
A greater value will improve the
connection speed.
0-35 dB
Security
The network security technologies
and protocols status
Authorized - has authentication
settings
Unauthorized - without
authentication setting.
Unauthorized also appears for
units set with authentication,
when they are not linked to a BS
and successfully authenticated.
Bandwidth
Device operation bandwidth
Depending on unit model: 5000,
7000, or 10000 KHz
Max Tx Power
The maximum uplink transmit power
Max RSSI
The maximum signal strength
indication value used since the last
reboot
-35 to -100 dBm
Max CINR
The maximum Carrier to
Interference-plus-Noise Ratio value
used since the last reboot
Connection Time
Time (in seconds) during which the
unit is connected to the BS

Rate

3.5 / 5 based on 2 votes.

Popular Alvarion Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top