Page 101 / 138
Scroll up to view Page 96 - 100
BreezeMAX PRO 6000 Product Manual
Chapter 8 - Configuring Telephony Parameters
VoIP Parameters
79
8.2
VoIP Parameters
The VoIP page includes the following parameters:
User Name
- The SIP (Session Initiation Protocol) User name. Its format depends on the Sip Server
Password
and
Confirm Password
- The SIP user Password
User Account
- The SIP Account. Its format depends on the Sip Server.
Display Name
- Enter a name that will be displayed on the Caller ID Display Name of the receiving
party (if supported by the network)
Figure 8-1: Telephony - VoIP Parameters
Page 102 / 138
BreezeMAX PRO 6000 Product Manual
Chapter 8 - Configuring Telephony Parameters
VoIP Parameters
80
Call Waiting
- Select this check-box to enable/disable suspending the current telephone call and
switch to a new incoming call (Default: Disabled).
Call Waiting Timeout
- enter a number of seconds after which the call waiting is timed out (Default:
30 seconds).
Call Block
list - set up the numbers as follows:
»
Incoming - blocks incoming calls from the listed numbers (up to 50 digits).
»
Outcoming - blocks outgoing calls from the listed numbers (up to 50 digits).
Page 103 / 138
Chapter 9 - Engineering
In this chapter:
“Introduction” on page 82
“WiMAX Configuration” on page 83
“VoIP Configuration” on page 87
“Service Line” on page 96
“Device Configuration” on page 100
“DM (Device Management) Settings” on page 101
“Function Settings” on page 106
“UI Settings” on page 107
zzAlvarion_ page
Page 104 / 138
BreezeMAX PRO 6000 Product Manual
Chapter 9 - Engineering
Introduction
82
9.1
Introduction
The Engineering menu item is accessible to the Operator only and provides advanced CPE configuration
parameters. The Engineering mode is available in a software package that is uploaded from the Status
page; See
“WiMAX Status” on page 67
).
For detailed description of terms and abbreviations, refer to the
“Glossary” on page 109
.
Page 105 / 138
BreezeMAX PRO 6000 Product Manual
Chapter 9 - Engineering
WiMAX Configuration
83
9.2
WiMAX Configuration
In this page the operator defines WiMAX parameters for the CPE WiMAX connection functionality.
Figure 9-1: Engineering - WMAX Config.
19216811.live