Page 66 / 138
Scroll up to view Page 61 - 65
BreezeMAX PRO 6000 Product Manual
Chapter 5 - Configuring Local Address Parameters
Introduction
45
5.1
Introduction
This chapter describes how to configure internal unit parameters such as DHCP server details and leasing
parameters.
INFORMATION
Any changes to this section should only be carried out by a network administrator familiar with the
functionality of these settings.
Page 67 / 138
BreezeMAX PRO 6000 Product Manual
Chapter 5 - Configuring Local Address Parameters
DHCP Server
46
5.2
DHCP Server
The unit has a built-in DHCP server that can be used for managing the distribution of IP addresses for the
devices connected to the local Ethernet ports. In the DHCP Server page you set DHCP parameters for
dynamic IP assignment.
Enable DHCP Server
- Select this check-box dynamically assign a leased IP address to clients that
connect to the device from the local network. This option is applicable to IP CS modes only. For Bridge
IPCS and Bridge ETHCS this option is disabled.
DHCP Server IP Address
DHCP Starting IP Address
- Enter the first IP address assigned by the DHCP server. The default
address is 192.168.254.1.
DHCP Ending IP Address
- Enter the last IP address assigned by the DHCP server. The default
address is 192.168.254.5.
DHCP Lease Time
- Set the time for renewing the IP Lease. Default: 15 minutes.
Figure 5-1: DHCP Server
Page 68 / 138
BreezeMAX PRO 6000 Product Manual
Chapter 5 - Configuring Local Address Parameters
Lease Status
47
5.3
Lease Status
The Lease Status page displays information regarding the leased IP address(es):
Client Host PC Name
Host PC MAC Address
IP Address
Remaining Lease Duration (seconds)
Click
Refresh
to display the updated information of the client host PC.
Click
Auto
to refresh the information automatically.
Figure 5-2: Lease Status
Page 69 / 138
BreezeMAX PRO 6000 Product Manual
Chapter 5 - Configuring Local Address Parameters
Lease Reservation
48
5.4
Lease Reservation
The Lease Reservation page displays information on reserved IP addresses for leasing. In this page you
assign the specific IP addresses to the specific client device connected to the Ethernet ports. You can also
add, delete, or modify the reservation settings.
Select
- Choose an IP to delete.
Host Name
- Enter a name to the host
MAC Address
- Add a device MAC address
IP Address
- Specify a reservation IP address for a specified MAC address
Enabled
- Select if to enable or disable a specified IP setting.
Use the
Add
or
Delete
buttons to add or clear reserved IPs for leasing. Click
Apply
to activate your
changes.
Figure 5-3: Lease Reservation
Page 70 / 138
BreezeMAX PRO 6000 Product Manual
Chapter 5 - Configuring Local Address Parameters
Lease Reservation
49
19216811.live