A-LINK WNAP4G

User Manual

91

Chapter 6 System

In this section you can see system information, system logs, use system tools for system

update and do service scheduling and system administration setting.

6.1 System Information

You can view the System Information and System log, and download/clear the System

A-LINK WNAP4G

User Manual

92

log, in this page.

6.2 System Status

6.2.1 Web Log

6.2.2 System Log

This page supports two methods to export system logs to specific destination by

means of syslog (UDP) and SMTP(TCP). The items you have to setup include:

1.

IP Address for Syslog

: Host IP of destination where syslog will be sent to.

Check

Enable

to enable this function.

A-LINK WNAP4G

User Manual

93

6.2.3 Email Alert

1.

Setting of Email alert

: Check if you want to enable Email alert (send syslog

via email).

2. SMTP Server: Port

: Input the SMTP server IP and port, which are connected

with ':'. If you do not specify port number, the default value is 25.

For example, "mail.your_url.com" or "192.168.1.100:26".

3. SMTP Username:

Enter the Username offered by your ISP.

4.

SMTP Password: Enter the User name offered by your ISP.

5. E-mail Addresses:

The recipients are the ones who will receive these logs.

You can assign more than 1 recipient, using ';' or ',' to separate these email

addresses.

6. E-mail Subject

: The subject of email alert is optional.

Afterwards, click on “Save” to store your settings or click “Undo” to give up the

changes.

A-LINK WNAP4G

User Manual

94

6.3 System Tools

6.3.1 Account & Password

You can change the System Password here. We

strongly

recommend you to

change the system password for security reason.

Click on “Save” to store your

settings or click “Undo” to give up the changes.

6.3.2 FW Upgrade

If new firmware is available, you can upgrade router firmware through the WEB GUI

here

.

A-LINK WNAP4G

User Manual

95

Press “browse” button to indicate the file name of new firmware, and then press

Upgrade button to start to upgrade new firmware on this device. If you want to

upg

rade a firmware which is from GPL policy, please check “Accept unofficial

firmware”.

NOTE:

Please do not turn the device off when upgrade is processing.

6.3.3 System Time

1.

Time Zone:

Select a time zone where this device locates.

2.

Auto-Synchronization:

Check

the “Enable” checkbox to enable this function.

Besides, you can select a NTP time server to consult UTC time.

3.

Sync with Time Server

: Click on the button if you want to set Date and Time

by NTP Protocol .

4.

Sync with my PC

: Click on the button if you want to set Date and Time using

PC’s Date and Time.

Afterwards, click on “Save” to store your settings or click “Undo” to give up