Page 76 / 111
Scroll up to view Page 71 - 75
A-LINK WNAP4G
User Manual
76
4.4 Green
The Smart Green Settings provide different power saving options for you to configure.
1.
Green AP:
With this function enabled, the device will try to turn off one wireless TX
path to save the power when there is no any wireless client connected.
2.
Power Saving Mode & Power Saving Check Interval:
With the power saving mode,
and time interval been specified, the device will automatically check if the power saving
criteria is meet or not periodically and reduce the overall power consumption of the
device consequently.
4.5 Management
4.5.1 UPnP
The device supports the UPnP function. If the OS of your client computer supports
this function, and you enabled it, like Windows XP, you can see the following icon
when the client computer gets IP from the device.
Page 77 / 111
A-LINK WNAP4G
User Manual
77
4.5.2 SNMP
In brief, SNMP, the Simple Network Management Protocol, is a protocol designed to
give a user the capability to remotely manage a computer network by polling and
setting terminal values and monitoring network events.
1.
Enable SNMP
: You must check “Local”, “Remote” or both to enable SNMP
function. If “Local” is checked, this device will respond request from LAN. If
“Remote” is checked, this device will respond request from WAN.
Page 78 / 111
A-LINK WNAP4G
User Manual
78
2.
Get Community
: The community of GetRequest is that this device will
respond.
3.
Set Community
: The community of SetRequest is that this device will
accept.
4.
IP 1, IP 2, IP 3, IP 4
: Enter the IP addresses of your SNMP Management
PCs. User has to configure where this device should send SNMP Trap message.
5.
SNMP Version
: Select proper SNMP Version that your SNMP Management
software supports.
6.
WAN Access IP Address
: If you want to limit the remote SNMP access to
specific computer, please enter the PC’s IP address. Th
e default value is 0.0.0.0,
and it means that any Internet connected computer can get some information of
the device with SNMP protocol.
Afterwards, click on
“Save”
to store your settings or click
“Undo”
to give up the
changes.
Page 79 / 111
A-LINK WNAP4G
User Manual
79
4.5.3 TR-069 Remote Management
1.
TR-069
: Disable or enable the TR-069 settings.
2.
ACS setting
: you may add ACS URL/ Username/ Password.
3.
CPE setting
: you may add CPE connection request port/ username
/password.
4.
Inform setting
: you may enable/disable the interval of informing CPE.
Note:
TR-069 is a customized feature for
ISP
only
and end user can not see this
setting page. If you are an ISP please contact with us once you get any problem to
configure.
Page 80 / 111
A-LINK WNAP4G
User Manual
80
Chapter 5
Configurations - Applications
In this section you can do
Disk Utility
,
Samba Server
,
FTP Service Configuration, Access
Control, iTunes Server, Download Assistant,
and
Web HDD
settings.
5.1 USSD
USSD is a way to let subscribers finish some application on line, such as recharge SIM
card.
Enter the USSD command you got from
ISP or carrier, and press button “Send” to send
this request to ISP or carrier. In most cases, ISP/Carrier will return a message regarding
to your USSD command. The replied message will be showed at this page as well.
Please note some replied message is se
nt back via SMS, and this device can’t deal with
any SMS message. If you don’t get any response after sending the command, please call
your ISP/carrier to confirm you request has been accepted.
19216811.live