Page 71 / 111
Scroll up to view Page 66 - 70
A-LINK WNAP4G
User Manual
71
more items-
“And Rule
-
Class” and “And Rule –
Class Info” in the icon below.
A. Class:
You can create your own QoS rule by different classes as below.
Class
Description
IP
IP address based
N
TCP port
UDPPORT
UDP port
MAC
MAC based
DSCP
DSCP based
TOS
TOS based
VLANPRI
VLAN enabled PRI
DSCP setting:
You can set your own DSCP value here.
Page 72 / 111
A-LINK WNAP4G
User Manual
72
DiffServ Code Point:
You can select code value.
Service Type:
You can select their service type.
B.
Function:
You can set your own function value to enable your QoS rule as
below.
Function
Description
Data
PRI
Priority
1~6
MAXR
Maximum bandwidth Rate
KBps/MBps
MINR
Minimum bandwidth Rate
KBps/MBps
SESSION
Connection session
number
DROP
Drop packet
None
LOG
Log event
None
ALERT
Alert event
None
Page 73 / 111
A-LINK WNAP4G
User Manual
73
PRI:
Function data- Priority : 1~6
C.
Direction:
You can select inbond/ outbond for your direction.
Direction
IN
inbond
OUT
outbond
BOTH
inbond & outbond
D.
Schedule
: leave the default value of “(0)Always” as it is
.
7.
Finishing QoS settings:
Once you saved the QoS rule, system will show you the rule as below, you can
add another new rule accordingly.
Page 74 / 111
A-LINK WNAP4G
User Manual
74
System will show you all your QoS rules as below
Note 1. :
You can move up or down the priority of al
l rules by pointing the ‘↑’or ’↓’
if you want to change the priority.
Note 2. :
You can unmark any rule if you do not want it enable now.
Page 75 / 111
A-LINK WNAP4G
User Manual
75
4.3 VLAN
The VLAN function allows you to divide local network into different “virtual LAN”. In some
cases, ISP m
ay need router to support “VLAN tag” for certain kinds of services (e.g.
IPTV) to work properly.
There are four LAN ports with this router, so you can have up to 4 VLAN if required.
Those four LAN ports belong to one VLAN by default. If you want to divide them into
different VLAN, you just need to assign different “VID” for them. If ISP requests a “VLAN
Tag” with your outgoing data, please remember to check the checkbox of “Tx TAG”.
If you want to map WAN ID, you can press
“
WAN VLAN settings
”
, and change router type
to Bridge and add WAN Map VLAN ID to your value.
19216811.live