Page 31 / 156
Scroll up to view Page 26 - 30
WLAN
Status
3FE-61830-AAAA-TCZZA
Alcatel-Lucent
4-5
Edition 01
May 2008
Field
Description
DHCP Client Table
A listing of clients that received DHCP-
assigned IP addresses from the CellPipe
7130 RG.
WLAN
Select
WLAN
6
in the Status menu to open the WLAN Status window. In this window you
can view the parameters of the WLAN.
Figure 4-3
WLAN Status window
The following table describes the fields of the WLAN Status window.
6
4-port wireless model only.
Page 32 / 156
Status
WLAN
4-6
Alcatel-Lucent
3FE-61830-AAAA-TCZZA
Edition 01
May 2008
Table 4-3
Field descriptions
Field
Description
Wireless Configuration
Wireless
Indicates whether the wireless function is
enabled.
band
Indicates the wireless radio band standard
used by the CellPipe 7130 RG. The 802.11
b standard supports a maximum data rate
of 11 Mb/s. The 802.11 g standard
supports a maximum data rate of 54 Mb/s.
Mode
The wireless working mode, either
AP
or
AP+WDS
.
Broadcast SSID
Indicates whether the CellPipe 7130 RG
will broadcast its SSID (enabled).
root
Status
Indicates whether the SSID has been
enabled.
SSID
Indicates the SSID assigned to the
CellPipe 7130 RG.
Authentication Mode
Indicates the authentication mode used by
the CellPipe 7130 RG.
Encrypt Mode
Indicates the encryption mode used by the
CellPipe 7130 RG.
vap0
Status
Indicates the status of virtual AP0.
vap1
Status
Indicates the status of virtual AP1.
vap2
Page 33 / 156
WAN
Status
3FE-61830-AAAA-TCZZA
Alcatel-Lucent
4-7
Edition 01
May 2008
Field
Description
Status
Indicates the status of virtual AP2.
vap3
Status
Indicates the status of virtual AP3.
Wireless Client List
Lists the wireless devices that are
connected to the CellPipe 7130 RG
Current Access Control List
Indicates the access control mode and
MAC address list.
WAN
Select
WAN
in the Status menu to open the WAN Status window. In this window you can
view status of the WAN, Default Gateway, and DNS Servers.
To configure the WAN, see “WAN Interface” in chapter 8.
Figure 4-4
WAN Status window
Page 34 / 156
Status
Port Mapping
4-8
Alcatel-Lucent
3FE-61830-AAAA-TCZZA
Edition 01
May 2008
The following table describes the fields of the WAN Status window.
Table 4-4
Field descriptions
Field
Description
Interface
The interface identifier.
VPI/VCI
The virtual path identifier and virtual
channel identifier of the listed interface.
Encap
The encapsulation type used by the
interface.
Protocol
The protocol connection type of the
interface.
IP Address
The IP address of the interface.
Gateway
The gateway of the interface.
Status
The status of the interface.
Default Gateway
The default DSL gateway provided by
your ISP.
DNS Servers
The default DSL DNS provided by your
ISP.
Port Mapping
Select
Port Mapping
7
in the Status menu to open the Port Mapping window. In this
window you can view the mapping relation and the status of port mapping.
7
4-port and 4-port wireless models only
Page 35 / 156
Port Mapping
Status
3FE-61830-AAAA-TCZZA
Alcatel-Lucent
4-9
Edition 01
May 2008
Figure 4-5
Port Mapping window
The following table describes the fields of the Port Mapping status window.
Table 4-5
Field descriptions
Field
Description
Select
The selected port mapping rule list.
Interface
The default group lists the port
information of the CellPipe 7130 RG.
Groups 1 to 4 list the ports that have been
mapped.
Priority
Indicates the priority of the port mapping
rules. There are four priority levels: Low,
Middle, High, or Highest.
19216811.live