Page 46 / 156
Scroll up to view Page 41 - 45
Wizard
To use the configuration wizard
5-6
Alcatel-Lucent
3FE-61830-AAAA-TCZZA
Edition 01
May 2008
Figure 5-4
PPP Username and Password window
The following table describes the fields of the PPP Username and Password window.
Figure 5-5
PPP Username and Password window
Field
Description
PPP Username
PPP Password
The username and password apply to
PPPoE and PPPoA encapsulation only.
Ensure that you have entered the correct
PPP username and password provided by
your ISP.
Page 47 / 156
To use the configuration wizard
Wizard
3FE-61830-AAAA-TCZZA
Alcatel-Lucent
5-7
Edition 01
May 2008
Field
Description
PPP Connection Type
The type of PPP connection, one of:
•
Continuous
(The connection is
established automatically, regardless of
the amount of traffic.)
•
Connect on Demand
(The
connection is only opened when traffic
must pass through an interface.)
•
Manual
(Used to connect to a location
once or occasionally – a user must log
in to the CellPipe 7130 RG and force
the connection open.)
The Idle Time value enables you to specify
the amount of time to wait (in seconds)
before the connection is dropped due to
inactivity.
6
Click
Next
. The LAN Interface Setup window appears. Set the field values according to
the needs of your local area network.
Page 48 / 156
Wizard
To use the configuration wizard
5-8
Alcatel-Lucent
3FE-61830-AAAA-TCZZA
Edition 01
May 2008
Figure 5-6
LAN Interface Setup window
The following table describes the fields of the LAN Interface Setup window.
Table 5-3
LAN Interface Setup window
Field
Description
LAN IP
The IP address of the CellPipe 7130 RG in
dotted decimal notation; for example,
192.168.1.1(factory default).
LAN Netmask
The subnet mask of the LAN IP address;
for example 255.255.255.0.
Enable Secondary IP
Select this check box to enable the
secondary LAN IP address.
Page 49 / 156
To use the configuration wizard
Wizard
3FE-61830-AAAA-TCZZA
Alcatel-Lucent
5-9
Edition 01
May 2008
Field
Description
Secondary LAN IP
The secondary IP address of the CellPipe
7130 RG in dotted decimal notation; for
example, 192.168.100.1(factory default).
Secondary LAN Netmask
The subnet mask of the secondary LAN IP
address; for example 255.255.255.0.
Enable DHCP Server
Select this check box to enable the DHCP
server. The DHCP server assigns IP
addresses on request to devices connected
to the LAN.
Start IP
The first of the contiguous addresses in the
IP address pool.
End IP
The last of the contiguous addresses in the
IP address pool.
Max Lease Time
The maximum time period for which a
connected computer will maintain a LAN
IP address assigned by DHCP.
7
Click
Next
. The WAN Setup – Summary window appears. This window lists the WAN
configuration settings specified in steps 2 to 6. Click
Finish
to save these settings and
reboot, or click
Back
to make changes. You have finished using the configuration wizard.
Page 50 / 156
Wizard
To use the configuration wizard
5-10
Alcatel-Lucent
3FE-61830-AAAA-TCZZA
Edition 01
May 2008
Figure 5-7
WAN Setup ° Summary window
1483 MER configuration
8
If you selected
1483 MER
as the WAN Connection Type in step 3, the WAN IP Settings
window appears.
19216811.live