1. Home
    2. /
  2. Manuals
    3. /
  3. Alcatel-Lucent
    4. /
  4. CellPipe 7130 RG
    5. /
  5. 14
Page 66 / 156 Scroll up to view Page 61 - 65
LAN
DHCP Settings
6-8
Alcatel-Lucent
3FE-61830-AAAA-TCZZA
Edition 01
May 2008
Field
Description
Delete Assigned IP
Select a row in MAC-Base Assignment
Table and click
Delete Assigned IP
to
delete this row.
Close
Click to close this window.
MAC-Base Assignment Table
Shows the assigned IP address associated
the MAC address.
Page 67 / 156
3FE-61830-AAAA-TCZZA
Alcatel-Lucent
7-1
Edition 01
May 2008
7
WLAN
Overview
Purpose
Note:
This menu is only available for the CellPipe 7130 RG 5Ae.A2010.
This section introduces the wireless LAN and some basic WLAN configurations for the
CellPipe 7130 RG (4-port wireless model). Wireless LANs can be as simple as two
computers with wireless LAN cards communicating in a peer-to-peer network, or as
complex as many computers with WLAN cards communicating through access points
which bridge network traffic to a wired LAN.
Select
WLAN
on the CellPipe 7130 RG menu bar to open the WLAN sub-menu, which
contains the following items:
•
Basic Settings
•
Security
•
Advance Settings
•
Access Control
•
WDS Settings
This menu is available only for the admin user.
Contents
This chapter covers the following topics:
Basic Settings
7-2
Page 68 / 156
WLAN
Basic Settings
7-2
Alcatel-Lucent
3FE-61830-AAAA-TCZZA
Edition 01
May 2008
Security
7-6
Advance Settings
7-10
Access Control
7-12
WDS Settings
7-14
Basic Settings
Select
Basic Settings
in the WLAN sub-menu to open the Wireless Basic Settings
window. This window is used to configure the parameters for wireless LAN clients that
may connect to your access point.
Figure 7-1
Wireless Basic Settings window
Page 69 / 156
Basic Settings
WLAN
3FE-61830-AAAA-TCZZA
Alcatel-Lucent
7-3
Edition 01
May 2008
The following table describes the fields of the Wireless Basic Settings window.
Table 7-1
Field descriptions
Field
Description
Disable Wireless LAN Interface
The wireless LAN is turned on by
default. Select the check box to disable
the wireless LAN.
Band
The radio band used by the wireless
transmissions.
Mode
Choose between:
•
AP
•
AP+WDS
To configure WDS, see WDS Settings.
(Root) SSID
The SSID is a unique name to identify
the CellPipe 7130 RG in the wireless
LAN. Wireless devices (i.e.
computers) that connect to the CellPipe
7130 RG must have the same SSID.
Enter a descriptive name.
Auth Type
The authentication type the CellPipe
7130 RG uses when devices connect to
the CellPipe 7130 RG; choose between
Open, Shared Key, and Auto.
Virtual SSID
Set VSSID
You can enable a maximum of four
SSIDs. Click
Set VSSID,
the Virtual
SSID window appears; see Figure 7-2.
SSID
You can enable or disable this SSID.
Country/Area
Select your geographical region.
Page 70 / 156
WLAN
Basic Settings
7-4
Alcatel-Lucent
3FE-61830-AAAA-TCZZA
Edition 01
May 2008
Field
Description
Channel Number
A channel is the radio frequency used
by an 802.11b/g wireless device. The
channels that are available depend on
your geographical area. If another
access point is nearby, use a different
channel to reduce signal interference.
Interference occurs when the radio
signal from a different access point
overlaps with your signal, degrading
performance.
Select a channel number from the
drop-down list.
Send Rate
The rate of the data transmission.
Choose between:
•
11Mb/s for 802.11b networks
•
54 Mb/s for 802.11g networks
•
Auto, to adjust automatically to the
available data transmission rate of
the current wireless network.
Radio Power (mW)
The radio transmission power
consumption. The greater the power
consumption, the farther the signal will
reach.
Apply Changes
Click to save your changes.
When you click
Set VSSID
, the Virtual SSID Setting window appears.

Rate

4.8 / 5 based on 4 votes.

Popular Alcatel-Lucent Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top